Electronics Forum | Mon Jun 20 03:37:43 EDT 2005 | MMunos
We have 3 inline Yestech systems in our facility. One system being used pre reflow for paste inspection and the other two for parts and solder. The systems work great for paste inspection (Better than what the sales guy told us). They are also very g
Electronics Forum | Wed Jun 22 19:43:14 EDT 2005 | BTaylor
I agree with steve. With so many vendors advertising to be the best, it is critical to have a "real time" demonstration on your product. Take a few good boards and a few defect boards along with the necessary data to the demo. Don't allow any prog
Electronics Forum | Tue May 24 19:35:36 EDT 2005 | davef
Certainly, most often, the focus of pot analysis is directed at controlling impurities. Maintaining proper level of tin is important, also. When the portion of tin decreases: * Liquidous temperature increases. * Ability to wet decreases. * Solder c
Electronics Forum | Tue May 24 18:00:42 EDT 2005 | davef
Pellet Fuels Institute; 1601 N. Kent Street, Suite 1001, Arlington, VA 22209; 703-522-6778 Fax 703-522-0548 pfimail@pelletheat.org http://www.pelletheat.org Pellet Fuels Institute represents the fuel preparation and clean burning technology of
Electronics Forum | Wed May 25 12:49:51 EDT 2005 | Steve Thomas
tuckered pony I'm riding. Nearly two years off from the biz, and the place I landed is the place I sold a bunch of used equipment to while at my last job. It's deja vu all over again. Anyway, I'm a little more active with the placement equipment he
Electronics Forum | Wed May 25 14:56:19 EDT 2005 | bobpan
Steve, Use the 1000 as a chip shooter only (and thats if it works once you turn it on). If you have problems with the 1000 just post questions as i am one of the last guys on the planet that knows that machine (and its been a while since i have worke
Electronics Forum | Wed May 25 19:47:01 EDT 2005 | russ
It wouldn't be that many placements (billions) since we are a low volume high mix shop but we have placed 100s of thousands with the N08 for sure. We use the N045 by far the most since we seem to be an 0603 and smaller type shop (probably into the m
Electronics Forum | Thu May 26 09:32:03 EDT 2005 | gregp
No one can stop you from making feeders. But unless they are better and cheaper than the OEM you will not be successful. Feeders look simple(CP4 for instance) but there are many underlying design concerns that are not apparent to the naked eye. Yo
Electronics Forum | Thu May 26 13:53:45 EDT 2005 | gregp
I wouldn't worry about patents except for those types of feeders which have patents such as the MyData Agilis feeders. I would worry about cost of tooling for $tampings. Long time for ROI there. Also pay attention to the burr side and shear side of
Electronics Forum | Fri May 27 04:54:24 EDT 2005 | Rob
At least cut your teeth on something that doesn't accurately offer up a device 1mm x 0.5mm every 0.09 seconds. There is precision & there is precision. A lot of cash has been spent by a lot of people on trying to make decent 3rd party fuji feeders,
