Electronics Forum | Mon Jul 24 13:45:14 EDT 2006 | samir
Most Test Technicians, Managers, and everyone else in the organization always believe that the BGA is the #1, and most likely failure mode in a circuit. You can analyze it with all the tools available...2D, 3D, 10D, underneath, etc...... convince th
Electronics Forum | Wed Jul 26 14:40:28 EDT 2006 | FredC
I just checked a hand full of scrap nozzles and the scuffing is usually on the right or left of the needle. If you have the cross pin facing you and looking down on the nozzle most of the scuffing or wear was on the left side, sometimes on both sides
Electronics Forum | Thu Jul 27 12:20:33 EDT 2006 | David
Hello all, We have customer who wants to produce boards 0.4 mm thick. But they have not allowed to put into the panel. Board has not regular shape so without pallet it is not possible to produce. I made pallet where is pocket the same shape as boar
Electronics Forum | Fri Jul 28 18:23:50 EDT 2006 | Board House
Why in the world would you want to start a Manufacturing facility, Hopefuly you were not thinkning of the USA. I would suggest learning to eat once a week, Live at your facility and do not operate with the lights on, This will help in controlling
Electronics Forum | Sun Jul 30 12:55:13 EDT 2006 | fastek
Grant- I'm not sure when it gets to the point when egos begin to over-ride productivity but at some point it does. I remember working at a large OEM builder of NIC cards back in the early 90's. We had a line manager for each line per shift, (5 line
Electronics Forum | Sun Jul 30 18:07:34 EDT 2006 | Grant
Hi, Yes, it seems the case, and it's something I am thinking about all the time. I am sure the guys who ran your company thought it was doing ok at the time, and I think it's a lot easer for things to go wrong than you imagine, but at the top it's h
Electronics Forum | Thu Jul 27 22:49:18 EDT 2006 | chrispy1963
I am searching for any information concerning this type of SMT placement equipment. Currently our facility utilizes Panasonic CM202 inline with MyData MY12 machines for our production builds. Our managment has found a couple of the Siemens machines
Electronics Forum | Fri Jul 28 09:35:12 EDT 2006 | chrisgriffin
I think Siemens 80 S20 is a great machine. I worked on them for a few years, with very little problems. They are extremely easy to maintain. I think a complete PM took about an hour. The software is good and user friendly. You can change one over
Electronics Forum | Sat Jul 29 00:34:40 EDT 2006 | darylp
G'day from Oz, I want to teach my wife to drive the MyData TP9-2U & would like to make a PC simulator she can practice with at home to understand the concepts of operation. Using TPSys 2.2.3L software, if I try to install it on a PC as a TP9, it bau
Electronics Forum | Tue Aug 01 08:52:53 EDT 2006 | davef
We never changed any thing after moving to imm silver. "Poor release" (paste hanging-up in the stencil holes) could have three main (or combination of) causes: 1 Equipment * Proper aperture area ratio provide better release * Laser cut release bette
