Electronics Forum | Tue Jan 31 17:18:37 EST 2017 | mainenetservices
You can contact Heller service by email info@hellerindustries.com to get help with any issue. High Deviation or high process alarm could be due to one of the below reason. A. Blower motor in subject zone is not running – check for air flow B. Heat
Electronics Forum | Sat Jul 23 02:16:52 EDT 2022 | poly
Is there are reason for going for larger (or smaller) boards when designing panels for use with a chain conveyor oven? My panels range from 0.6mm 2 layer (for touch with hatched ground) to 1.6mm 4 layer. I'm planning to go for smaller panels to reduc
Electronics Forum | Mon Jul 25 17:57:48 EDT 2022 | glasscake
Assembleon (Yamaha Re-branded) machines have treated me well as I have 13 machines running any given day. Manuals are readily available in English but are more clear if you can read the original Japanese or Chinese versions. The biggest issue you
Electronics Forum | Fri Jul 29 06:48:11 EDT 2022 | jojoled
I have old JUKI machine, which after power loss seems to have corupted configuration file(all works fine,except Vision configuration for fiducial recognition : camera is unable to read/ write parameters for Vision), can anybody help to tell which fil
Electronics Forum | Tue Aug 02 14:05:42 EDT 2022 | jojoled
Hi Evtimov,thanks. Well the "paralell pick" doesnt work at all if place the feeders exactly 104mm apart (for example feeder position 31 and 43) which is exactly the distance of the 2heads..even I put the feeders in 10 and 50 for example, it still pic
Electronics Forum | Wed Aug 03 20:28:10 EDT 2022 | cbeneat
We have been known to bring the break air to, and past .1 on the gauge. You have to be careful, as you increase the break air It can blow small parts that are close to any light, or send a part that it is trying to mount. So we always increase increm
Electronics Forum | Thu Aug 04 19:05:32 EDT 2022 | proceng1
I have been using this with good results. https://www.amazon.com/Portable-Machine-Welding-Equipment-Storage/dp/B092DB5R3S/ref=asc_df_B092DB5R3S/?tag=hyprod-20&linkCode=df0&hvadid=507714472492&hvpos=&hvnetw=g&hvrand=16970206287231
Electronics Forum | Thu Aug 04 09:40:12 EDT 2022 | jojoled
Hi, did anybody face such error(attached)? After calibrate all axis I get this error. "E202074 : Z axis of left head : SERVO alarm. Turn off the power to the machine and perform inspection" - see attachement. Machine was fully working day
Electronics Forum | Tue Aug 23 09:52:51 EDT 2022 | jojoled
Can anybody recomend exact model number of USB to floppy disk emulator, which works for sure on JUKI KE7xx series PnP machines? I have bought this one : https://www.gotekemulator.com/P_view.asp?pid=54 and have KE760 machine, but it doesnt work (tried
Electronics Forum | Sat Sep 10 17:12:18 EDT 2022 | yannick_herzog
Hello, we use an oven to dry our MSL components after the floor lifes expires. The oven works at 40°C / 0.1% RH. The plan is to upgrade the oven from 40°C to 60°C to shorten the duration of the process. I have found a number of articles mentioning