Electronics Forum | Mon Mar 12 13:13:11 EDT 2007 | jseagle
We are going to try clips from Autosplice, the small clips come on tape and reel which are placed by the machine and then reflowed. After reflow we install the shield.
Electronics Forum | Mon Mar 12 18:20:07 EDT 2007 | davef
You should tell your customer that they're very nice people, but the purpose of RF shields is reduce RF emissions, not to be a air or gas tight enclosure. The requirements of hermeticity are wholly different than those of RF shielding. Do they want
Electronics Forum | Tue Mar 13 21:28:16 EDT 2007 | davef
Try this: http://www.accutroninc.com/download/ict.pdf We have no relationship, nor receive benefit from the company referenced above.
Electronics Forum | Tue Mar 13 12:24:11 EDT 2007 | Grant
Hi, Yes, a lot of this comes down to budget. Are you doing a "line" or is your budget only allow for batch processing? You will need to provide some more info. Grant
Electronics Forum | Tue Mar 13 12:54:58 EDT 2007 | hynergy
You required the process control equipments. 1) Paste Height Checker: To measure the solder paste thickness after printing. 2) Temperature Profiler: To measure the reflow oven temperature whether is within the control spec.
Electronics Forum | Thu Mar 15 12:44:48 EDT 2007 | ck_the_flip
Have any of you seen this? http://www.seattlerobotics.org/encoder/200006/oven_art.htm
Electronics Forum | Mon Mar 12 22:05:49 EDT 2007 | long
i'm a new guy in thru_hole insertion technology. have any one know any web that i can go through to get more knowledge about this tecnology (especially in technical side).
Electronics Forum | Tue Mar 13 05:29:45 EDT 2007 | aj
Hi all, We are running a Product with some peelable mask on the bottom. The first 20 boards seem to have hardened the Mask so I have adjusted the profile to suit. Problem now is what do I do with the 20 boards that I have - extremely hard to get ma
Electronics Forum | Tue Mar 13 11:45:56 EDT 2007 | realchunks
Hi Sr. http://www.oee.com/pdf/fast-guide-to-oee.pdf Pages 10 and 11 (I believe) will get you going.
Electronics Forum | Tue Mar 13 12:23:56 EDT 2007 | cyber_wolf
I looked at that paper yesterday. I do not see anything in there that talks about all of the variables that are in a high mix - high changeover - multiple variable(s) process.