Electronics Forum | Tue Mar 18 12:43:16 EDT 2008 | fsw
All, Thnx for all your inputs. We have decided to use Rapid Lock sockets & pins instead of soldering the wires.
Electronics Forum | Fri Feb 29 09:13:46 EST 2008 | bobpan
I have seen this on our assemblers look in the machine and check to be sure there is no obstruction IN the down flag sensor located on the bottom of the front transport assembly.
Electronics Forum | Fri Feb 29 09:15:23 EST 2008 | jdengler
I do not know the QSV-1, but it sounds like there is a sensor that would detect when the clamp is open. Try to find this sensor and see if it is working.
Electronics Forum | Tue Mar 18 22:48:24 EDT 2008 | lectronix
We were told to turn on the air supply prior to turning on the power to the machine. We see this error when we forget to turn the air supply on first, you can just aknowledge the error and it will work.
Electronics Forum | Fri Feb 29 09:51:39 EST 2008 | iantech
Guys I am trying to measure the placement repeatabilty of my placement machines, and I was wondering if you guys had any usefull excell tools you have developed along the way that might help me input the figures so my bosses can understand ian.
Electronics Forum | Sun Mar 02 17:02:52 EST 2008 | davef
We have talked about Cpk many times here on SMTnet, discussed source of glass slugs for placement assessment, and talked about placement Cpk a few times. Search the fine SMTnet Archives to find those threads to provide you with additional background.
Electronics Forum | Fri Feb 29 09:56:34 EST 2008 | iantech
Hi all are any of you guys using Dek proflow catriges with senju paste, Just wondering what the temp should be for transport and storage ian
Electronics Forum | Sun Mar 02 23:31:12 EST 2008 | fastek
Sure.........since the company owner obviously knows more about DEK printers than DEK does.........tell him to fix it.
Electronics Forum | Mon Mar 03 07:34:55 EST 2008 | realchunks
Does the machine act slow when cold? Might need to be cleaned out. One year old? No warrenty?
Electronics Forum | Mon Mar 03 09:12:54 EST 2008 | cyber_wolf
I agree. Go tell your boss he doesn't know crap and he should fix it himself. That is typically the best route to go.
