Electronics Forum | Fri Feb 11 07:16:46 EST 2022 | russellreid
Thanks for replying and the suggestions also. You are right. After that I did a Google search and found a solution (Stated below). Now the issue is fixed after applying the process mentioned there. Source: https://digicruncher.com/nvidia-driver-wont-
Electronics Forum | Sat Feb 12 10:24:32 EST 2022 | compit
Maybe the pin (?) with wheels on the ends of the belt bent? Can they be rotated 180 degrees?
Electronics Forum | Sat Feb 12 14:27:22 EST 2022 | micropak
Hope you might have found the manual. But just in case you didn't, I have the English manual for MV-3/MV-7
Electronics Forum | Tue Feb 15 18:03:42 EST 2022 | emeto
Thank you guys. So far we have Kapton and Mylar on our list. If you can come with more, will be appreciated. We will do the whole study after we have enough candidate materials and I will share with you results.
Electronics Forum | Tue Feb 15 19:48:43 EST 2022 | mihai_voivod
Thank you for the answers. All the wheels are spinning. I have attached a video of it popping off. I need to count the spacers on a track that doesn't pop off and compare.
Electronics Forum | Tue Feb 15 20:38:10 EST 2022 | cbeneat
Bad belt? I know it's a new one, but stranger things have happened. Have you tried swapping belts from one side to the other?
Electronics Forum | Tue Feb 15 20:42:06 EST 2022 | jdengler
I think it is the belt. Looking at the video it appears to come off just after the splice goes around the pulley, so probably a bad splice. Jerry
Electronics Forum | Wed Feb 16 20:41:48 EST 2022 | mihai_voivod
Thank you guys for all of the feedback. I ended up swapping the left and right conveyor belts and they seem to have been working properly for 24 hours.
Electronics Forum | Thu Feb 17 00:13:58 EST 2022 | sarason
There are companys that recover discs like this by mounting that platters in a donor drive. The costs are usually very reasonable considering your downtime etc. sarason
Electronics Forum | Thu Feb 17 09:01:26 EST 2022 | sarason
An NDS9936 is a SO-8 MOSFET since this is a SO-16, its likely to be 2, easier enough to chack by compareing the pin patterns. It is what you would expect on a board which is remote on a car harness, and has a control circuit. sarason
