Electronics Forum | Wed Aug 25 12:13:40 EDT 2010 | remullis
You may want to search on "Cover Tape", what date code is on the parts reel? I have multiple issues with cover tape sticking to the paper and not peeling back. Causes pick errors due to the part being covered. I think my problem is the parts have too
Electronics Forum | Wed Aug 25 12:44:42 EDT 2010 | fdr4prez
I previously did a search on "peel back force" and there were a few results, and there were a few hits that say EIA-481 is the standard, but nothing on what the standard force range is. A search on "cover tape" yeilds many hits about breaking cover
Electronics Forum | Thu Aug 26 09:44:45 EDT 2010 | smtmfgeng
Hello all, I have a few CP43's and am struggling to find their air consumption ratings. I found that our IP3 consumes 240 Nl/min for the machine itself, and the MTU unit consumes 600 Nl/min, however Fuji's spec sheets do not list these ratings for t
Electronics Forum | Wed Sep 01 08:54:25 EDT 2010 | fedorend
Hi Namruht, One question, what exactly are you > wanting to achieve using "feeder calibration? In > what way would feeder calibration make these > feeders (between Siemens and Universal) > compatible? Or maybe i misunderstood your point > .....
Electronics Forum | Thu Sep 02 04:59:17 EDT 2010 | sachu_70
Feeder calibration helps to center the window opening used during component pick-up by a machine nozzle. Once this is established, the next step would be to confirm the centering of Machine nozzle to the center of this feeder window during machine op
Electronics Forum | Fri Aug 27 14:41:36 EDT 2010 | namruht
The machine sees the nozzles and thinks that the part is there. The lighting on the machine is in desperate need of an upgrade. Constently having to tweak the GF's to get components to pass vision. We share a line computer between 2 lines and the cam
Electronics Forum | Wed Sep 01 08:01:09 EDT 2010 | sachu_70
A component placer performance can be kept alive if proper maintenance is carried out regularly. During such maintenance, all functions including component recognoition and illumination levels should be verified and any wear-out part replaced if requ
Electronics Forum | Thu Sep 02 04:39:36 EDT 2010 | sachu_70
Are we now talking about some "Vintage Collection" cars or the regular ones that do not have much re-sale value? In the former case, it would surely be worth spending on maintenance. However in case of SMT line equipments, one should consider 7-10 y
Electronics Forum | Fri Aug 27 08:20:22 EDT 2010 | whitewing
I've just set up a small forum for users of the old Versatronics Pick/place machines, but also for discussion of low-end pick/place equipment, with a UK/Europe-based emphasis. URL : http://www.electricstuff.co.uk/forum
Electronics Forum | Mon Aug 30 10:17:16 EDT 2010 | markgray
We currently use this devise in one of our designs with no issues. We are using a 3mil stencil and a 45% apperature reduction. It is virtually impossible to eliminate voids but they are in an acceptable range. Solder balls are caused on this componen
