Electronics Forum | Wed Sep 13 08:08:56 EDT 2006 | meritajs
Hi Davef and Rob, Thank Davef for your advice,we will make "dip&look" soldering test. Rob,we are tolking about companents storage time after manufacturing. Sometime we get companents which was shipment more then year ago In many cases we have problem
Electronics Forum | Tue Sep 12 09:50:31 EDT 2006 | C.K.
There is a formula for that out there somewhere. It has to do with the part mass and the area of solderable surface. If the part mass is too great in relation to solderable surface area, the part falls off in a d/s reflow cycle. Anyone remember th
Electronics Forum | Tue Sep 12 16:53:58 EDT 2006 | stepheniii
Make sure you desicate the boards if they have MSDs on them. I'm guessing you have a part on the board you want removed, but can't do it normally. At one time I thought it might be slick to make a spring loaded Kapton tape "tent". The idea being th
Electronics Forum | Tue Sep 12 22:03:22 EDT 2006 | davef
Really Rocky? What's the meaning of Russ' "if it will fit" in your scheme? As an alternative to your scheme, he could glue the nut on its side, tie a string through the hole in the nut, attach the other end of the string to the open door, and the
Electronics Forum | Fri Sep 15 11:38:19 EDT 2006 | scott
I want to thank you for your help. MPM SN's are continuous (7001 to the more current 7780's), no date included. I had already contacted MPM and their Technical Support personnel could/would not pin-point the year it was manufactured, hence the reas
Electronics Forum | Tue Sep 12 15:02:39 EDT 2006 | Fred
We are being pushed to use seaborne shipping containers as the method to receive PCB�s from fab houses in China. Time on the ocean will be several days to a few weeks depending on how slow the boat is. Does anyone have any suggestions on packaging
Electronics Forum | Tue Sep 12 16:49:56 EDT 2006 | Brad Courtemanche
Good Afternoon, I'm am probably asking a question that has been answered a million times but I am looking for other operators and process engineer feedback on the slim kic 2000 profiling unit. I have played with the unit several times and am not to s
Electronics Forum | Thu Sep 14 18:10:12 EDT 2006 | SWAG
Good point Russ but we do builds that comprise of 50 of this and 100 of that. Our high average issue might be around 400 or 500 parts but most are under 100. 20,40,60 flat over-issue gets us set-up and error scrap. 2% of 50 is 1 part. 2% of 500
Electronics Forum | Fri Sep 15 12:05:07 EDT 2006 | Steve
SWAG/Russ, How do you guys handle the left overs that the surface mount operators are left with at the end of the job? Do they discard the excess material or return it to stock? We are a small CM and have runs similar to SWAG. 50-100pc, high mix. We
Electronics Forum | Wed Sep 13 15:54:53 EDT 2006 | Osvaldo Smith
Hello, I am trying to find some Programming and host manuals for the following Panasert and Sony machines: MSH-G1 (Panasert SMT) RH2 (Panasert Through Hole) RH3 (Panasert Through Hole) RH5 (Panasert Through Hole) JVK (Panasert Through Hole) AX (Pan