Electronics Forum | Fri Mar 19 10:08:49 EST 2004 | davef
We don't know dip about your Multitronics 2000 SX, but there may be another angle to take in addition to the Tyco tact that Pete C proposed. The facts may not be precise [someone will hopefully straighten things out], but close enough for your needs
Electronics Forum | Fri Mar 19 11:40:28 EST 2004 | ccleland
The Multitroniks 2000 series machine was not a Europlacer machine. It was designed and build by Multitroniks as an entry level machine and has a very basic simple design. It has very easy to use software and a very heavy stable platform but quality
Electronics Forum | Fri Mar 19 09:24:04 EST 2004 | mzaboogie
Good Morning Everyone, Lately, we have been recieving a growing number of components from manufacturers and distributors with a new moisture level classification. The problem is that we will recieve some with MSD packaging and label and some with ou
Electronics Forum | Fri Mar 26 12:26:31 EST 2004 | Mike Konrad
Hi Patrick, With all due respect, it is easy to quantify zero. You made a claim that your flux produces ZERO residue. There are several industry-standards (IPC and Military) of determining the cleanliness of post-reflowed circuit assemblies. Th
Electronics Forum | Sun Mar 28 22:17:36 EST 2004 | Grant Petty
Hi, I would also be interested in this thread, but our problem has a different twist to it. We have good results from our reflow with Koki no clean paste, however when we pass the boards through the wave solder machine, the flux in that leaves a fog
Electronics Forum | Wed Mar 24 10:04:09 EST 2004 | Marc Apell
183C, 60 +- 15 seconds). The quesiton to use a straight ramp or soak profile comes down to the product your are soldering. The key is to get the whole assembly at the same peak temp (minimized delta) and same TAL for effective formation of the so
Electronics Forum | Wed Mar 24 20:19:09 EST 2004 | Ken
I recently did a no clean flux eval and by far the leader in the category for remainder (residue) was Interflux 2005MZ 1. You first mission is to provide acceptable solder joints. 2. Only apply what you need to achieve acceptable results. Spray f
Electronics Forum | Thu Mar 25 11:09:29 EST 2004 | paul_bmc
I ran into the same problem. What I had is a customer that required us to use a No Clean because of the Low flux activity then they want it cleaned. Well to clean the No clean your going to use such a high percentage of cleaner in your sapinifer th
Electronics Forum | Thu Mar 25 15:01:45 EST 2004 | patrickbruneel
Why are you guys not simply switching to No-Residue?? Residue free soldering is not a dream, it is a reality and is succesfully implemented for over a decade. I am the founder of no-residue technology, a technology developed to effectively compete w
Electronics Forum | Sat Mar 27 12:32:34 EST 2004 | Bill
I am looking for technical support for our two RTI 6500 AOI equipment. We had worked with CR-Technologies in the past --but from what I understand, they had been absorbed by PhotoDynamics. Which is where you end up if you try to go to the old CRTe
