Electronics Forum | Wed Dec 29 13:45:08 EST 2010 | methos1979
Chris, The red/blue filter as you call it (on the MV3L it's called HorzVert Sum I think) has become my go-to light source view for manual visual evaluation of flagged solder defects. Of all the lighting sources available, this one gives me the best
Electronics Forum | Mon Jan 10 18:08:29 EST 2011 | eadthem
vpblf I actually installed the Uniserver (apache mysql php) WAMP on the AOI machine and there is a setting to make it generate HTML board results, cant remember where off the top of my head. anyhow anyone in the inspection area can now open firefo
Electronics Forum | Tue Jan 11 13:12:58 EST 2011 | methos1979
Has anyone had any luck programming using the side cameras to inspect for defects on the sides of chip components? We recently had an escape of a damaged chip capacitor that was impossible to see from the top camera but was clearly visible with the
Electronics Forum | Thu Jan 13 10:30:40 EST 2011 | bdamico
Hello Scott, Simply program the side angle cameras as you would for any other device using the downward camera. For instance, solder joint inspection for a PLCC would utilize a basis window, bridge inspection algorithm and individual solder joint i
Electronics Forum | Thu Jan 13 20:40:47 EST 2011 | eadthem
properties > settings > troubleshooting > Set hardware acceleration to NONE > apply OK apply OK reboot. without this any attempt to take a screen shot of the program will not save the image (because in a fruitless attempt to speed it up they have pr
Electronics Forum | Wed Jan 19 12:54:17 EST 2011 | bdamico
Hello Mark, The centroid data you are currently using to program the MV-2HTL may be used with either platform. However, the libraries cannot be shared due differences in camera resolution. The MV-2HTL will have a 1.3 megapixel camera versus the 2 m
Electronics Forum | Fri Nov 05 11:30:53 EDT 2010 | deanm
We have a Quad QSV-1 pick and place machine that has performed fine for us with the exception of cylindrical glass (MELF) type diodes. The machine often fails to pick these out of the tape to the point where it is easier to hand place them. As far
Electronics Forum | Tue Nov 09 04:21:11 EST 2010 | bising
Hi SMT World, I am facing a technical challenge related to an SOIC 14lds with thermal pad on it's belly that needs to be soldered onto PCB, together with leads. It is a 50 per board, expected 80% solder load on every one. We have some units without
Electronics Forum | Fri Nov 19 21:24:25 EST 2010 | rodrigo
I saw a lot of people read this post but no one answer me so I thought someone may be interested to know how this thing works. My problem was in the "F4G_LINE.CFG" file. The "RTM" heading had a "NO" when it should have been "YES". This will make wha
Electronics Forum | Fri Nov 19 13:07:01 EST 2010 | vmorina
Hello everyone, Talking to my boss today I was able to determine what we're really looking for in terms of reflow soldering. The company is not looking to do a volume run; we're trying to solder chips for prototype boards, which are currently done w