Electronics Forum | Fri Feb 22 13:55:27 EST 2019 | bruce_mackean
Is there a need for a simple application to merge a bill of material with the xy placement data into a single (or top/bottom) files for machine programming? ie. add a part number column to the xy data, including "N/A" for parts not found in the BoM?
Electronics Forum | Wed Feb 27 03:52:56 EST 2019 | beulah5588
Hello, I'm a Mechatronics engineer.I'm working for in a electronics company. We got a new project based on hardware designing. We need the help of an electronics manufacturing company to complete this project. I have done a lot of research and found
Electronics Forum | Tue Mar 05 11:07:17 EST 2019 | sumote
Looking to purchase a DIP lead forming tool. The tool that has the 2 rollers that let you place the DIP part on the rail and run it between 2 rollers (ball-bearing?). I found a place that once sold them. They were called an RS Pro IC Insertion Tool
Electronics Forum | Tue Mar 05 11:08:31 EST 2019 | mrk
Hi all, We have an assembly which features non-plated tooling holes used to align the board in a bed of nails style test fixture. This assembly is rather small, and as such, the test points are pretty small as well. We have found that some variation
Electronics Forum | Tue Mar 26 06:07:58 EDT 2019 | pooja_4t
Hi i am referring Tin whisker report JESD201A class 2 standard from Vishay. i can see at TC -55/85C using pbfree reflow there are 0 growth at 500&1000 cycles. for snpb reflow and the same temperature and same cycle significant growth can be found. my
Electronics Forum | Fri Mar 29 20:07:50 EDT 2019 | sarason
I measured the temperature rise when I built the unit and it has a nice linear rise in temperature over the 3 minutes. I have used the Quikees before. The galcon gas stinks and must be evacuated. The galcon is expensive. The galcon is a perflourocar
Electronics Forum | Mon Apr 15 11:40:49 EDT 2019 | cyber_wolf
To qualify the equipment for production use, you need to only do IQ, OQ. There are two parts to this. 1.) The protocol. What you are going to test. 2.) The report. Did the testing meet the spec and supporting test sample data. Example of typical
Electronics Forum | Tue May 07 13:49:05 EDT 2019 | tey422
Like I stated before, I am not familiar with the machine. I can only make suggestions. If you found solder paste on the nozzle, clean it off to prevent part stuck to the nozzle tip. I would also check if the nozzle tips are being worn off; uneven we
Electronics Forum | Mon Jun 10 08:51:01 EDT 2019 | don_julio
Thank you Clare. After doing some more research, I found they are known in the industry as "Carriers". I did look into that durostone material. They prices are beyond reasonable. My trek now is seeking a material to make planks out of to lay the b
Electronics Forum | Wed Jun 26 04:00:30 EDT 2019 | SMTA-David
Thanks, I'll take a look. Something else I found was the Z height for the module was set to 1.7mm but I am picking up the part on the PCB surface which is only 1.0mm from PCB being loaded, therefore the part must have been let got 0.7mm above PCB an
