10 fuji and cp and error and code results

Electronics Forum: fuji and cp and error and code (Page 1 of 1)

Fuji GSP III machine not turning on and showing SO error

Electronics Forum | Sat Nov 07 18:38:32 EST 2020 | enzik

Hello to all, The Fuji GSP III screen printer was working well yesterday. This morning, the machine turned on and the display screen was showing nothing. I went to the back of the machine and reset one of the VM1152A. The display screen is now showi

Fuji Pick and Place Machines

Electronics Forum | Tue Jun 01 16:12:49 EDT 2004 | gregf912

The 10k rebuild does not need to be applied every 3-4 months as previosly stated. A cp machine that is running 100% of the time on a 24/7 basis will tack up 10k hours in 12.4 months. Now we all know that this is impossible due to parts shortages, pro

Re: Epoxy printing and wave soldering on 0603 and 0402 components

Electronics Forum | Tue Jul 13 14:19:00 EDT 1999 | JohnW

Hi, I need some urgent informations on stencil design guidelines on how to perform epoxy printing on 0603 and 0402 components. Could anyone help? ( Reflow process is not possible because of some other constriants) Sec

Re: Epoxy printing and wave soldering on 0603 and 0402 components

Electronics Forum | Tue Jul 13 14:25:57 EDT 1999 | Earl Moon

Hi, I need some urgent informations on stencil design guidelines on how to perform epoxy printing on 0603 and 0402 components. Could anyone help? ( Reflow process is not possible because of some other constriants)

Re: Epoxy printing and wave soldering on 0603 and 0402 components

Electronics Forum | Wed Jul 14 21:34:16 EDT 1999 | karlin

Hi, I need some urgent informations on stencil design guidelines on how to perform epoxy printing on 0603 and 0402 components. Could anyone help? ( Reflow process is not possible because of some other constriants)

Re: Epoxy printing and wave soldering on 0603 and 0402 components

Electronics Forum | Thu Jul 15 14:38:38 EDT 1999 | JohnW

Hi, I need some urgent informations on stencil design guidelines on how to perform epoxy printing on 0603 and 0402 components. Could anyone help? ( Reflow process is not possible because of some other constriants)

Beware of counterfeit Fuji feeders and parts out of China

Electronics Forum | Mon Dec 13 10:38:38 EST 2004 | fastek

This I have heard from (2) different sources. Fuji feeders for CP series machines are now being counterfeited in China and are being sold as original. They will in all appearences look completely legit in original boxes and with Fuji bar-codes. Once

CP4 jerks all axis after power up and reset sw...

Electronics Forum | Wed Apr 11 17:00:28 EDT 2012 | rodrigo

Hi all, Our cp4 moves rather violently (jerks) all axis when the reset sw is pressed after power up. I've got all sorts of errors after boot up: Servo amp error: D,X,Y, etc Overtravel D,X,Y, etc D clutch error, power off machine We've checked all

CP4 jerks all axis after power up and reset sw...

Electronics Forum | Thu Apr 12 17:49:35 EDT 2012 | rodrigo

I've done the Fuji flush. It does the same thing. We can not load proper again because it does not communicate with either the F4G or MCS/30. I was able to boot into mechanical mode at one point but now I can not do that either. This thing is drivi

CP4 jerks all axis after power up and reset sw...

Electronics Forum | Tue Apr 17 13:07:17 EDT 2012 | rodrigo

Well... after much headache I found a bad relay contact in M1CR1E. The good news is somehow the axis are no longer jerking. The bad news is that it still does not work. When I turn it on now it shows this: emergency stop (in red) waiting for reset

  1  

fuji and cp and error and code searches for Companies, Equipment, Machines, Suppliers & Information