Electronics Forum: fuji and cp6 and length (Page 1 of 3)

Re: obective comparison between siplace and fuji pick and place equipment

Electronics Forum | Sat Oct 10 09:01:46 EDT 1998 | Al Carrillo

we currently have a siplace line(80s/f) and are inhereting a fuji line from another site. I need an objective comparison between the two. What are the strengths and weaknesses of the fuji with regard to programming, operating and maintenance. any c

High-end SPI and AOI?

Electronics Forum | Tue Oct 13 08:09:53 EDT 2009 | kudamarani08

Can anyone help me recommend or simulate a SPI and AOI machine that can balance our FUJI NXT 1 with 14 modules. We are using MPM accela printer. 200 UPH is our target. Here's the PCB dimension length(x) = 399.92mm width(y) = 141.626mm Thanks all!

High-end SPI and AOI?

Electronics Forum | Tue Oct 13 22:56:22 EDT 2009 | cpcompany

Can anyone help me recommend or simulate a SPI > and AOI machine that can balance our FUJI NXT 1 > with 14 modules. We are using MPM accela printer. > 200 UPH is our target. > > Here's the PCB > dimension > > length(x) = 399.92mm width(y) = >

Fuji Pick and Place Machines

Electronics Forum | Mon May 10 17:21:03 EDT 2004 | smt..

I work with Fuji equipment For over 10yrs�. Cp3, cp4.cp6.cp7, ip1, ip2, ip3, qp341, qp242, qp351. Also, work with MYDATA, SAMSUN, and QUAD AMISTAR�. Fuji is the best in my opinion.

Fuji Pick and Place Machines

Electronics Forum | Mon May 10 17:21:08 EDT 2004 | smt..

I work with Fuji equipment For over 10yrs�. Cp3, cp4.cp6.cp7, ip1, ip2, ip3, qp341, qp242, qp351. Also, work with MYDATA, SAMSUN, and QUAD AMISTAR�. Fuji is the best in my opinion.

Fuji Pick and Place Machines

Electronics Forum | Fri Oct 08 17:07:19 EDT 2004 | Christopher

Hi > > For throughput seimens is the best and > footprint is smallest Fuji Machine ist the best on the world. I working on the Cp 6,CP 7, QP 3421 and Qp 351. Best regards Christopher

Fuji CP6 and IP3 specifications request

Electronics Forum | Mon Aug 08 08:48:42 EDT 2016 | sumote

Jerry, Thank you! Anyone have the CP6 specs?

Fuji Pick and Place Machines

Electronics Forum | Wed May 19 16:57:08 EDT 2004 | ricardof

We have in our facilities in Mexico more than 150 FUJI machines (CPs, IPs, QPs, GPs), they're in fact Bombproof, but it is not amazing to do that with 1206, SOTs on SOPs, we just feel a kind of disappointed with that 10K hours service, that means yo

Fuji Pick and Place Machines

Electronics Forum | Tue Oct 12 10:24:22 EDT 2004 | sdsmt

i worked with cp6s in 1995 and 1996. we always had missing part problems that was machine related. we had to inspect every board for missing parts. it was a disaster, imho, but i expect a chipshooter to consistently load chips. otherwise, it was

Fuji Pick and Place Machines

Electronics Forum | Tue Jun 01 16:12:49 EDT 2004 | gregf912

The 10k rebuild does not need to be applied every 3-4 months as previosly stated. A cp machine that is running 100% of the time on a 24/7 basis will tack up 10k hours in 12.4 months. Now we all know that this is impossible due to parts shortages, pro

  1 2 3 Next

fuji and cp6 and length searches for Companies, Equipment, Machines, Suppliers & Information

High Throughput Reflow Oven

High Throughput Reflow Oven
Non-heated dispensing system

Outstanding liquid dispensing and UV curing, all within one platform, watch the video.


Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.


Inspection mirrors for electronic rework and repair.