Electronics Forum: fuji cp643 4800 (Page 1 of 10)

cp643 OS error

Electronics Forum | Wed Jul 13 08:59:59 EDT 2005 | dougs

take a trace and send it to fuji for analysis.

IP3 4400 vision processor swap to 4800 processor

Electronics Forum | Tue Feb 16 14:40:54 EST 1999 | john hearty

Has anyone changed out the old 4400 vision processor on a Fuji IP3 and replaced it with a newer 4800 vision processor. What does it take to do this and what does it consist of doing. What do I need to order from Fuji in order to do this.

fuji CP642 or CP643

Electronics Forum | Tue Oct 02 03:35:05 EDT 2012 | benreben

Hi all, depending on your experience is there a difference between CP642 and CP643? what is the most stable machine service level? there know problem with these machines? Thanks Regards,

fuji CP642 or CP643

Electronics Forum | Tue Oct 02 10:26:17 EDT 2012 | jimmyboz

If I had a choice I would choose a CP642 90% of the time. The loading system on the 643 can load 2 PCBs at the same time but is complicated. If 2 seconds on PCB load time is critical on your production choose the 643, if not, choose the 642.

Fuji CP6-4000 vs. CP643

Electronics Forum | Thu Dec 27 11:07:19 EST 2007 | kpm135

Can anyone tell me the differences between the CP6-4000 and the CP643? Is the CP643 able to place a wider component range? Does the CP643 have some sort of vision system while the CP6-4000 doesn't? If anyone has the Fuji Specs on the CP643 and could

FUJI CP42, CP643

Electronics Forum | Sat Sep 15 00:50:45 EDT 2012 | mdang

Do anyone know a good field engineer or Technical Support for FUJI SMT CP42, CP643 in southern California? Thanks, -Michael


Electronics Forum | Fri Mar 22 06:28:47 EDT 2013 | mdang

I would like to get a copy of the CD for Fuji CP643E which has all manual & information on the machine? If you have it, please let me know. Thanks, -Michael

0201 placement by Fuji CP643 Machine

Electronics Forum | Thu Jul 26 06:33:30 EDT 2018 | nageshd

Hi, I want to place 0201 components by Fuji-CP643 Machine. Guide me. Thx, Nagesh

0201 placement by Fuji CP643 Machine

Electronics Forum | Fri Jul 27 03:45:33 EDT 2018 | robl

CP643 does place 0201s. CP6 was limited to 0402. At the turn of the millenium most 0201's were being placed by Fuji's or Pana's.

0201 placement by Fuji CP643 Machine

Electronics Forum | Fri Jul 27 06:52:49 EDT 2018 | cyber_wolf

CP643 does place 0201's. Like I said everything has to be perfect or expect mediocre results at best. When working with smaller parts Fuji CP machines are very picky about table level, part height, and mechanical pick and place parameters.

  1 2 3 4 5 6 7 8 9 10 Next

fuji cp643 4800 searches for Companies, Equipment, Machines, Suppliers & Information