Electronics Forum: fuji qp 341e mm (Page 1 of 2)

Fuji Pick and Place Machines

Electronics Forum | Sat Jul 31 21:52:55 EDT 2004 | mat

Do you know how to control MTU magazine speed for QP341E,is it in the Fujicam part editor?

SMT Assembly Line

Electronics Forum | Tue Jun 06 23:52:52 EDT 2006 | saiwong

According to your low/mid volume production. I suggest you to use the Fuji XP 143, XP 243 or QP 341E with MTU. The cost of new totally less than 250k.

QP341E Trouble

Electronics Forum | Fri Aug 17 03:39:21 EDT 2007 | fujillews

Can you confirm, if the part is picked in centre it is rejected? if you put a 2mm offset in pickup VP works correctly?

QP341E Trouble

Electronics Forum | Fri Aug 17 07:53:26 EDT 2007 | mmjm_1099

I got more detailed into this. It seems the operators only need to do a pick offset of 2mm on the stick feeders.

QP341E Trouble

Electronics Forum | Wed Aug 15 08:49:46 EDT 2007 | mmjm_1099

All, I have a recent issue I would like some input on. It seems the picking of parts is off by about 2mm lately. The placing of the parts is fine it's just when it goes to pick we need offsets of 2mm for it to work. Someone leave me some feedback if

Re: Fuji QP132

Electronics Forum | Wed Nov 18 17:18:59 EST 1998 | Tom

| My company is now using Fuji SMT machine, and is now considering to purchase QP132. Appreciate if sone one let me know about QP132's capability, relaiability and atability on the production. And what is advantages conpared to Philips FCM. | |Other

Can F4G connect with more than 8 CP7 or QP3?

Electronics Forum | Tue Jun 11 15:56:43 EDT 2002 | mjabure

Actually F4G is a programming environment similar to panatools, not a machine, it stands for "Fuji 4th Generation". The connection being questioned is to the communication network, and yes with the proper hardware you should be able to connect more t

Flason SMT Products

Electronics Forum | Thu Oct 04 00:01:59 EDT 2018 | gaintstar

Flason SMT FUJI Pick and Place Machine: http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-A10395-Fiber-Amplifier.html http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-Amplifier-A1038t.html http://www.flason-smt.co

QP2 vs GSM

Electronics Forum | Fri May 22 07:59:14 EDT 1998 | Jerry

We are currently comparing the Fuji QP2 machine to the Universal GSM. The primary use will be for QFP's down to .4 mm pitch and for 300+I/O BGAs. My initial input has been that you spend alot of time tweeking PD's on the QP because the vision syste

Re: QP2 vs GSM

Electronics Forum | Thu May 28 18:16:40 EDT 1998 | Ian Bates

| We are currently comparing the Fuji QP2 machine to the Universal GSM. The primary use will be for QFP's down to .4 mm pitch and for 300+I/O BGAs. My initial input has been that you spend alot of time tweeking PD's on the QP because the vision sys

  1 2 Next

fuji qp 341e mm searches for Companies, Equipment, Machines, Suppliers & Information

SMT feeders

High Precision Fluid Dispensers
Sell Used SMT & Test Equipment

High Throughput Reflow Oven
PCB Handling with CE

Smt Feeder repair service centers in Europe, North, South America
Fluid Dispensing, Staking, TIM, Solder Paste

We offer SMT Nozzles, feeders and spare parts globally. Find out more
best pcb reflow oven

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
PCB Depanelizers

"Heller Korea"