Electronics Forum | Wed Jan 24 17:48:28 EST 2018 | ranap121212
Hello Could I ask for advice? We have new machines with a full nitrogen tunnel. Type of soldering nozzle: worthmann 5 rows and next nozzle (in this same machine) worthmann 7 rows. One person in my organization claims that the delta nozzle is not wor
Electronics Forum | Fri Apr 18 18:06:47 EDT 2014 | davef
Methods that can reduce the wettability of OSP: * Previous heat cycles * Previous cleaning cycles * IPC-1601 "Printed Board Handling and Storage Guidelines" says do not bake prior to soldering * Using improper handling methods BR ... davef
Electronics Forum | Thu Apr 17 13:37:11 EDT 2014 | anvil1021
Hello All....we have several hundred PCBs that we need to run with a no-clean solder process and the surface finish is OSP. Our preliminary testing has found that the solder will not wet the entire pad even if the pad is over printed? We have contact
Electronics Forum | Fri Apr 18 14:25:51 EDT 2014 | horchak
what is the technology? Is there fine pitch, double sided, number of layers, lead free? If the pcbs are not of the highest quality you may be set up for failure with no clean process. Couple things to look at is your paste flux content versus medal
Electronics Forum | Mon Jun 29 07:17:25 EDT 2015 | donlockard
Seho maxi wave 3240 should be considered as well. Invented full tunnel nitrogen systems that have lower operating costs and provide yields unlike what can be achieved by air wave systems.
Electronics Forum | Tue Sep 23 23:19:34 EDT 2003 | RLW
If you have a board that you've run several times, now you run it and like before all settings are the same, but now you have 0603's randomly skewed or an inch or so away from their intended pad (as if popped up in the air), or an occasional 7343 cap
Electronics Forum | Fri Apr 10 10:20:15 EDT 2020 | unisoft
Yes process engineers that work for contract manufacturers try to get the full CAD or XY rotation files from their clients unfortunately still many of their customers still give them only Gerber files for the PCB project. Unisoft has had a focus on
Electronics Forum | Wed May 09 03:56:36 EDT 2018 | ced
Hello, I work on the replacement on our old waves. The objective is to replace 6622C waves by full tunnel N2 waves, for the benchmark, I have selected 3 manufacturers : Ersa, Seho and Electrovert. What are your experiences with these manufacturers
Electronics Forum | Fri Aug 24 14:56:11 EDT 2001 | Hussman
Paul, All the machines yulisted are very god at placement. One thing to keep in mind is parts availability. Some of our jobs come from the customer in "kits". Not everyone supplies you with a full real of parts. Be sure that the machine you pick
Electronics Forum | Fri Aug 23 16:02:37 EDT 2002 | davef
Low Cost Flip Chip Technologies for DCA, WLCSP, and PBGA Assemblies; John Lau; McGraw-Hill Professional; ISBN: 0071351418; 2000 * Chapter 6. Flip Chip on Board with Conventional Underfills. * Chapter 7. Flip Chip on Board with No-Flow Underfills. * C
