Electronics Forum | Mon May 19 17:17:41 EDT 2003 | JB
We currently use a Universal GDM for our glue dispensing applications, piston pumps. My question is: Have you had any problems with air getting in the dispense system that will cause missing dots? If so, how have you approached to this problem? Int
Electronics Forum | Wed Aug 22 04:29:48 EDT 2007 | raf_jabil
Has anyone experienced intermittent communication issues with GSM/GDM and PCT conveyors? I have an intermittent issue where sometimes I would hit the ESTOP on the PCT conveyor(downstream) in order to get the board to eject out of the GSM/GDM. I have
Electronics Forum | Sat Apr 24 08:23:03 EDT 1999 | Bubba
| Surprisingly enough, ever since the addition of an omega wave, we solder those often-troublesome SOT23's just fine and dandy.. anyways, long-term, well be getting a universal GDM which uses positive displacement pumps..currently we're using fuji g
Electronics Forum | Sat Jun 17 12:54:41 EDT 2000 | Jan Rinaldo
Does anyone have an idea if it's possible to transform a program created in Adhesive Dispenser 4713(Universal) to GDM 4716 from the same brand ? Thanks in advance, Jan
Electronics Forum | Wed Jan 30 09:37:28 EST 2002 | clarkk
Does anyone out there have experience dispensing solder paste with a Universal GDM (4716AL) with positive displacement pumps? I'd like to hear any comments on the success or failure of the machine to dispense consistently, effect of temperature varia
Electronics Forum | Thu Feb 24 11:45:17 EST 2005 | JB
Any Universal GDM users out there, what nozzle type are you using succesfully to dispense glue on 0603's? Single or Dual tip? How about standoffs? Thanks in advance for the info.
Electronics Forum | Tue Mar 01 03:25:33 EST 2005 | bing
We are using a GDM with a linear piston pump fitted to dispence adhesive on 0603's. Use Universal part number 43273801 needle with a 42346504 piston. The single needle dimentions are 0.010 ID, 0.028 OD, 0.005 stand off
Electronics Forum | Wed Jan 30 12:22:06 EST 2002 | jax
Clark, The universal GDM should handle your application with ease. Although not as accurate as an archimedes screw, the positive displacement pump of your GDM will still be well within any tolerances if maintained and operated properly.. Not to me
Electronics Forum | Fri Mar 27 11:44:14 EST 1998 | Ron Beasley
Can anyone give me any input on CAM/ALOT (Gemini) and Universal (GDM) adhesive dot dispensers.
