Electronics Forum | Mon Mar 13 13:23:20 EST 2006 | stepheniii
Get a book on effective complaining. Gerbers is not a good way to program. Matching up the designators is but one headache. At the very least try and get centroid data. But try for ascii cad files. Are there any programs that generate gerbers but ca
Electronics Forum | Wed Dec 02 12:02:33 EST 2020 | mikekeens
Depends on the programming that needs to be done - there is free software available such as GERBV - 'http://gerbv.geda-project.org/' but not that easy to use. For comparing BOM's there is some free software called MELD - http://meldmerge.org/ that's
Electronics Forum | Fri May 17 14:12:17 EDT 2002 | dason_c
Not now, Valor may under develop the module for its Trilogy 5000 with the stencil aperture based on the rules which you set. Also, check with IRI stencil (Alpha), they have a s/w and based on using ODB++ file and not Gerber. Rgds.
Electronics Forum | Thu Nov 12 08:53:46 EST 1998 | Paul McCann
All , Does anyone out there use CNC routing machines ? If so could you let me know their make , country of origin etc. Do any of you have the facility to use gerber or CAD files for creating part programmes either on or off-line ? If so could you le
Electronics Forum | Thu Dec 03 15:31:12 EST 2020 | spoiltforchoice
And for the purpose of completeness you can also use: GC-Prevue Pro Fab3000 GerberGrab VisualPlace The last two are free but the best method of all is to tell whoever made the gerbers to generate the Centroid file too. There is literally no excus
Electronics Forum | Wed May 24 15:45:38 EDT 2000 | JAX
John, Would you enlighten us to what machines you are talking about. I have never heard of such things. Typically, machines map out the boards with the locations of the fiducials relative to there CAD locations in order to account for stretch. Local
Electronics Forum | Wed Jan 02 12:11:32 EST 2002 | mparker
Ian is correct in saying that the Cert.s and x-section should be forwarded to QA. It would be the responsibility of Incoming or Receiving Inspection to validate the materials. Your suppliers are offering proof that they comply to industry standards o
Electronics Forum | Thu Oct 21 06:26:50 EDT 2004 | dennispoquiz
Right. Fiducial comes with the CAD data or the gerber files. If it doesnt, and you need to create fiducial coordinates, you may use a digitizer or a caliper and make use of the reference pin as the origin. Now if the fiducial camera focus is way out,
Electronics Forum | Tue Apr 26 17:28:29 EDT 2005 | davef
Not sure. Try: * ScanCAD International; P.O. Box 598, 19181 Highway 8, Morrison, CO 80465-0598; 303-697-8888 F 303-697-8580 info@scancad.com http://www.scancad.com * Artwork Conversion Software; 417 Ingalls St., Santa Cruz, CA 95060; 831-426-6163 F
Electronics Forum | Thu Dec 14 22:28:38 EST 2006 | Tony
Hi, where can I find info about how to make the pad design to work for VSSOP48 0.4 mm Pitch & TSSOP56 0.5 mm pitch components? I should also mention that we are working in a project that this 14 layers High-Frequency RoHS board is included. The pad c
.gif)
