Electronics Forum | Sat Nov 08 16:55:22 EST 2008 | rway
I think you'll find that the YTV-F1 system is comparatively priced at around $100K. Plus it has a color camera and more functionality than what you will get with the Landrex system. You might also look at what Mirtec has. I have only used them for
Electronics Forum | Mon Oct 20 14:28:09 EDT 2008 | jdumont
Yup, just read that in the link Patrick sent. Thanks again... Im going to have everyone screen the boards for this carefully before processing. I have also sent the board manufacturer an email to get their comment on the matter. No PCB vendor thinks
Electronics Forum | Tue Oct 28 13:00:56 EDT 2008 | exman
ax-5 having problem with pickup problem when the head placement try to pickup the component on the feeder the toolbit will fall off eventdo teach the part center very good but when they pickup it off about one inch happent on ly robot #1 the rest of
Electronics Forum | Thu Oct 30 09:23:34 EDT 2008 | jwolvans
Hi, Rob. Does the table appear to hang up, then suddenly let go? If so, check the alignment of all four conveyor rail guide blocks, especially if the clamping rails have been recently removed for maintenance. After that, check the piston assembly t
Electronics Forum | Thu Oct 30 16:53:38 EDT 2008 | m79d
Hi all I am going to get a board laid out which will be done on a fuji cp43, could the experts please tell me what should be the width of the tooling strips? size/placement of the fiducials? I also want to use the pin to hold the board, where exactl
Electronics Forum | Tue Nov 11 13:03:12 EST 2008 | snsmt
I aligned the parts to be on thecenter, but it keeps getting misaligned. http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=PCE3508TR-ND and http://search.murata.co.jp/Ceramy/image/img/PDF/ENG/L0114S0133DLW21S.pdf hope this helps.
Electronics Forum | Wed Nov 19 17:29:05 EST 2008 | elias67
It is not as easy as just buying a Laser machine. There is much more involved in bringing this in house. With the price of stencils these days, you would have to be consuming a very large amount of stencils to justify such an investment. Steve is r
Electronics Forum | Tue Dec 09 18:11:06 EST 2008 | davef
Just to keep this up in the air, go to the http://www.ipc.org free download section. There is a contract assembler questionaire that could be a good starting point for what you seek to accopmlish. Check it, get back to us and maybe we can use that as
Electronics Forum | Thu Dec 04 15:27:26 EST 2008 | jax
Check the spring tension on the reel holder. When the reels start running out of parts the spring can provide enough tension to keep the reel from spinning. I have seen this on some of the dual-lane feeders. Tape the spring back to verify. If this is
Electronics Forum | Mon Dec 08 07:52:22 EST 2008 | vleasher
Check the spring tension on the reel holder. When > the reels start running out of parts the spring > can provide enough tension to keep the reel from > spinning. I have seen this on some of the > dual-lane feeders. Tape the spring back to > ver
