Electronics Forum | Sat Jun 03 09:50:18 EDT 2023 | poly
I've got an old MPM Acella that I got very used. It had a few problems due to its age and being beaten up a bit but it's an excellent machine and after a bit of love and attention is working very well. Mpm / itw eae were very helpful with getting m
Electronics Forum | Mon Jun 05 16:08:22 EDT 2023 | dontfeedphils
I dealt with Hanwha/Samsung machines for about a year and wasn't a huge fan. Software was always a bit half-baked in my opinion, and the support was as well. The hardware always felt very cheap to me as well. Don't get me wrong, they'll pick and p
Electronics Forum | Sat Jun 10 00:47:25 EDT 2023 | frankchan
Hi, been following your requests for a while, Ovens are our specialties and are manufactured in our warehouse. 3 years warranty supported. For mounter alone, we can support multiple choices based on your requests, plus the selective oven, I think you
Electronics Forum | Sun Jun 18 19:59:28 EDT 2023 | smtusa
Seeing this graphic has me rethinking solder paste jetting as alternative to stencil printing. It seems it's only 2-3x faster 80k points per hour vs 28k. Wouldn't it be better to get 10 time pressure dispensers vs 1 solder jet?
Electronics Forum | Tue Jun 27 20:24:56 EDT 2023 | auriga2001
If you're lucky, it's just a bad boot sector. You can take the drive out, hook it up to another computer and copy it before trying to fix anything. Then try to reinstall programs if you have them. If you're unlucky the hard drive died. You might be a
Electronics Forum | Thu Jun 29 01:04:57 EDT 2023 | auriga2001
Have 4 MPM Momentum at our facility. Been using them personally for 8 years. Surprisingly accurate and repeatable prints. Agree with other poster about some of the settings being hard to find, but not a huge problem; it can self-adjust pretty well if
Electronics Forum | Mon Jul 03 02:41:16 EDT 2023 | jalina
Hi Researchmfg, If upload picture would be great to interpret this question, anyway,if bridge occur defect should be adjudge NG product,to avoide this issue,firstly,bridge is a PCB defect that happens when solder gets to an area it shouldn't be. You
Electronics Forum | Wed Aug 02 02:02:12 EDT 2023 | ttheis
Of the few contract jobs that we ever took one of them was with smt pogo pins. Alignment was poor and most were crooked. Probably could have been resolved with less paste and tuning the process but customer was frustrated that their design ended up w
Electronics Forum | Mon Oct 02 12:22:46 EDT 2023 | carl_p
Hi, I use this Material, you can get a few different types to work with certain sensors but I've used them for a solid 12 months now for reflowing. I'm using multiple board materials down to 0.4mm & I've had zero issues. https://www.datumalloys.com
Electronics Forum | Wed Oct 04 20:46:56 EDT 2023 | stephendo
I believe usually board shops will have scrap pieces laying around and will send you some if you ask. I've also seen them use scrap material to sandwich production boards for shipment to protect them. And we usually get scrap boards for testing and h