Electronics Forum: glichn lead free reflow oven sr108c (Page 1 of 30)

lead free joint finish

Electronics Forum | Thu Jan 29 11:30:56 EST 2009 | rgduval

As others have said, you'll have some difficulties getting good reflow on pb-free out of a 3-zone oven. We did it with a 4-zone for awhile, but only had really good success on low thermal density boards. That said, you should definitely check your

lead free joint finish

Electronics Forum | Thu Jan 29 20:57:06 EST 2009 | padawanlinuxero

HI!!! its a ERSA Reflow Oven HotFLOW 7 and I really appreciate some help thanks

lead free joint finish

Electronics Forum | Thu Jan 29 16:51:57 EST 2009 | gregoryyork

Hi Small ovens work fine if the settings are correct and I seriously doubt 55cm/min is right. Profile it and speed down to around 35cm/min. Increase first zone to around 170 keep second at 208 but increase last to around 280 BUT profile to check it

lead free joint finish

Electronics Forum | Wed Jan 28 21:47:56 EST 2009 | padawanlinuxero

Hello! I am having trouble with the new changes from lead joint to lead free joint, we are working on change to lead free, I am using a 3 zone oven reflow, the zone temps are : zone 1 zone 2 zone 3 (top and bottom) 128 208 260 th

lead free joint finish

Electronics Forum | Fri Jan 30 06:28:42 EST 2009 | gregoryyork

Hi Armando Hotflow 7 is a big machine and one of the best Reflow ovens around (in my opinion), well suited for Lead Free. A typical 1.6mm board has the following settings for Lead Free SAC305 paste All Temperature settings are Top and Bottom Prehea

reflow oven

Electronics Forum | Mon Apr 11 08:55:49 EDT 2005 | greg

One more question. Is it realy worth to have reflow oven with nitrogen for lead free?. What are yours experiences? Greg

reflow oven

Electronics Forum | Mon Apr 11 07:46:51 EDT 2005 | mmjm_1099

Make sure you find out that short to longer ovens are both Lead-Free capable. If you want respond here on what they say for future reference for people.

reflow oven

Electronics Forum | Mon May 24 15:50:11 EDT 2004 | Rob

hi all What do you think about soldering pb-free in reflow oven (air) lenght 1,7m (5 zones top,bottom) with max zone temp. 300C? Do you think that this process will be stable? Our max PCb dimension 260x260 mm. When i compare different oven producer t

reflow oven

Electronics Forum | Mon Apr 11 06:37:59 EDT 2005 | amstech

As long as you have a continuous profile with required soak and dwell periods, the zone lengths do not matter. For lead free, usually ramp to peak is preffered.that is with minimum soak (you can not avoid soak anyway. You can achieve the profiles irr

Which benchtop reflow oven for lead free?

Electronics Forum | Thu Aug 05 12:51:19 EDT 2010 | peteb

Need recommendations on brands and models of reflow ovens for lead free. Small benchtop for prototyping and short runs. Board size about 10" by 10". What works well? What to stay away from? Thanks for any input and advice.

  1 2 3 4 5 6 7 8 9 10 Next

glichn lead free reflow oven sr108c searches for Companies, Equipment, Machines, Suppliers & Information