Electronics Forum | Fri Nov 13 08:43:02 EST 2009 | herman
reash, Go directly to APS and get one of the APS GF-12 ovens. I have been using these for 15 years as a low-to-medium volume oven for general purpose reflow of CCAs up to about 12" by 12" with excellent results. I use them for BGA re-balling, underfi
Electronics Forum | Fri Dec 18 12:43:34 EST 2009 | gazupfer
jamm, As with the other answers you've received, I agree there will be a difference. The question is will the difference between the temperatures of the product profiled at the mesh belt put you out of spec when you run production on the rail? the ke
Electronics Forum | Tue Jan 12 08:06:43 EST 2010 | kpm135
basically the rule of thumb for the 8mm feeder is that you only want one component exposed in the pocket at a time. If you see more than one component exposed you need to go down in size. The reason for this is that if there is another component expo
Electronics Forum | Mon Jan 25 00:56:38 EST 2010 | sparrow
Hello, Mydata p&p machines are built for high mixed and low/mid volume production, so if you talk about very low volume - no doubt, mydata is what you can use. You can consider 2 models for your application - MY100SX or MY100LX, depending on the min
Electronics Forum | Wed Mar 10 20:50:00 EST 2010 | davesss
We are a small company in Illinois, and we have an Amistar AR-5500 that is inoperational. due to the economic situation we had no choice but layoff the operator. he was very understanding of the situation and we agreed that we were going to get him b
Electronics Forum | Wed Mar 31 09:44:12 EDT 2010 | bandjwet
One thing I would suggest right off the top is to go to a paste printing process. This will get first pass yields higher (usually 10+% higher than gel flux). If you are suggesting that you have good collapse everywhere, the profile is adequate (soun
Electronics Forum | Wed Apr 21 17:50:04 EDT 2010 | joeherz
Does it have to be one for both 1D and 2D? We > scan barcodes we print with a 200 DPI printer > which works out to 5 mil wide lines with no > problem. 2D barcodes need a completely different > kind of scanner. > > I know there are scanners > th
Electronics Forum | Sun Apr 25 21:01:57 EDT 2010 | m79d
Hi all our IP1(1993)is not reading the board fiducials, the light comes on at the fid camera and stay on and the machine just hangs. Need to press the emergency stop button to go any further and screen says 'mark not readable'. None of the bulbs h
Electronics Forum | Tue Apr 27 16:42:18 EDT 2010 | m79d
Hi jepoy + a very frazzled man thanks for your suggestions,here is how it went:- I found a couple of these VM1710 boards and tried one and still nothing. I really wanted to see if power was getting to the camera and anything coming out. I was loo
Electronics Forum | Thu Apr 29 09:18:54 EDT 2010 | rgduval
If you go with a Quad from PPM, I believe that they've developed a windows interface for the machine. They also have a couple of old Quad people working there for continued support. --I receive no benedits from PPM, but I am a happy customer-- We
