Electronics Forum | Fri Dec 01 05:59:55 EST 2017 | sarason
When you go repairing resources like one time copies of an installed OS for a machine like yours , you have to treat it like your life depended on it. So get a copy of the harddisk before you attempt to repair it no matter which methodology you use.
Electronics Forum | Wed Nov 28 06:16:06 EST 2018 | mnyut
You need to look at what other smaller companies > are using, the KY machines usually go in > multiples into large installations. That's absolutely right, that the machines work excellently if they are only used for testing. But this also applies mo
Electronics Forum | Fri Mar 02 16:37:53 EST 2018 | wesatitcpcb
We have a SMT800-CL and we are having issues reading the Sump/Chamber Temp and Resistivity. We are looking for a manual, parts list, or service manual for the machine that we purchased used in 2012. The RAW reading of the sump and chamber Resistivit
Electronics Forum | Thu Apr 05 10:03:28 EDT 2018 | roblackey
Lasers can go quite often, but if you are lucky and not in a great hurry you can get them refurbished dirt cheap. If you have a good 750/760 that has been well maintained it should run for a long time, but if it has not been loved you can end up payi
Electronics Forum | Mon Mar 26 02:41:01 EDT 2018 | robl
Hi Reckless, If it is an Opal Xii with the 8 nozzle conversion it is a no brainer. If it's only got 4 nozzles, then it still has the advantage of being able to place down to 01005 (the 7 series is only 0402), and should be able to handle a wider r
Electronics Forum | Wed Mar 28 02:27:29 EDT 2018 | robl
Hi Reckless, Depends on model of Samsung & Juki. For example you talked earlier of a Juki 750 compared to an Assembleon Opal Xii, which were different generations - a fair comparison would have been a Juki 2060 to an Opal Xii. Same with the Samsu
Electronics Forum | Wed Mar 28 12:24:57 EDT 2018 | reckless
https://www.ebay.com/itm/Juki-KE-760-SMT-PICK-AND-PLACE-MACHINE/282894334640?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 Not sure if a Juki 760 is worth $7300 shipped with feeders, MTC, etc. I saw a video of it running and it looked
Electronics Forum | Mon Mar 26 16:58:53 EDT 2018 | solderingpro
Is there anything stopping you from replacing the flat belt solution to a continuous running steel roller chain conveyor? - From there (depending upon board temperature) you should be able to buffer your boards in a vertical buffer station if neede
Electronics Forum | Tue Jul 17 02:37:31 EDT 2018 | hottchkisu
I interpreted the binary values using a hex editor. It took a while to figure it out, but it’s actually pretty simple. Originally I had planned to manage the data across our printer programs like barcodes, board id’s as locations etc. But they never
Electronics Forum | Sat Jun 02 19:32:20 EDT 2018 | reckless
Most pick and place machines today look highly advanced and extremely complicated and need alot of manufacturer support. Remind me of modern day german cars. My question is can any of these machines be run without Manufacturer support? I imagine p