Electronics Forum | Sun Mar 15 08:48:53 EDT 2015 | davef
Sure, the formulation and purpose of a soldering flux and a socket cleaner are basically the same. Off the top of my head, differences are: * Activation temperature: soldering flux [~200*C], socket cleaner [~120*F] * Compatibility with some solder
Electronics Forum | Mon Mar 16 06:12:32 EDT 2015 | bobpan
The first thing to do is to change the z-rod. Sometimes a very old z-rod spring will weaken causing it to reject many parts. If it only rejects parts after a nozzle change....you may need to put some super lube grease on the O-rings on the bottom of
Electronics Forum | Fri May 15 21:12:13 EDT 2015 | jlawson
As far as I know is pretty basic and only matches IPN to a feeder , does not offer serialisation of actual parts. For trace this is not accurate ie trace a btach to a work order to couple of PCB not possible. This may have changed in latest JUKI off
Electronics Forum | Mon Apr 27 14:39:38 EDT 2015 | davef
Anirudh: When board fabs talk "surface finishing" they're talking about the solderability protection that you'd like on the solderable copper component mounting pads that you laid-out for each component: * Bare copper pads corrode very quickly * Corr
Electronics Forum | Fri May 01 04:10:35 EDT 2015 | dberenguer
We recently purchased a Quadra Laser P&P machine from another company. The machine is in good conditions and we've been able to test most of the hardware functions of the machine, including fiducial recognition, feeders and header exchange. We feel
Electronics Forum | Sat May 02 03:17:01 EDT 2015 | dberenguer
Thanks Sarason, I will take a look at your software ASAP. In the meantime, I've been able to answer my own question. Feeders can be associated to components by using the same component name in both tables. It's very simple in fact. These TWS Quadra
Electronics Forum | Sun May 31 11:14:48 EDT 2015 | visionbot
Looks good. Have you done any work on feeding > form part tubes? I have a back burner project > trying to speed up the changover on our machine > with the vibe feeders. VisionBot works with cut tape SMT, is not necessary to have advanced mechani
Electronics Forum | Mon May 25 01:50:48 EDT 2015 | alexeis
Hi, As we found, Valor have a best NPI tools but other parts are limited and is not completed. Also, Valor was a single solution for NPI about 10-15 years ago, but today you can find NPI tools from China, Europe, USA and other that can do the same a
Electronics Forum | Fri Jun 26 10:33:08 EDT 2015 | Asif
Hello Professionals, Good morning, We are circuit card manufacturer for the Aerospace industry with low volume and High mix level. We have a plan to Purchase a NEW REFLOW OVEN. Currently we are using Electrovert BRAVO reflow oven which is about 8 yea
Electronics Forum | Tue Jul 14 01:48:43 EDT 2015 | buckcho
Hello. I used Heller before - very stable oven, I had zero problems. Maintenance is also very easy. I also think they are not so expensive. You have to look at the power consumption and N2 if you are going to use it. Some ovens can trick you with low