Electronics Forum | Fri Oct 28 10:03:13 EDT 2005 | rlackey
They don't index fast enough - On GSM's the original "black" feeders were replaced by "blue" feeders that indexed a lot quicker, that just about kept up with a flex head. There's no way one of those is going to index 8 or 9 times a second to keep
Electronics Forum | Thu Jan 12 16:16:33 EST 2006 | PWH
Thanks JAX and Cmiller. I have spec'd "on the head" optics 2.6 mpp. No upward cameras but might "wire" it for magellan digital for future add-on. Will be buying/using prec. pro. feeders but might have to use some old GSM pneumatics from time to ti
Electronics Forum | Tue Mar 14 15:02:58 EST 2006 | bigdaddysoy9
You can try swapping cards 10 and 11 in your "General Purpose I/O Chassis", which is the front center panel of the machine. Make sure you change the jumper configurations before you swap them. If the interlocks start working, but your beacon lights q
Electronics Forum | Wed Mar 15 10:07:17 EST 2006 | geb
*** New related Question*** Thank you for your suggestions. Unfortunately it is still not working though. I have noticed at the top of the "General Purpose I/O Chassis" that a red LED next to PCB location 0 is permanently on. But this is not on on o
Electronics Forum | Wed Mar 15 10:55:43 EST 2006 | PWH
I'm very far from an OS2 master but sounds like you need more RAM? Might help to get rid of files you don't need like segment repairs. They are in C:/USOS/PRODUCT/SEGREP. Also, it's possible that "MinFree" is set so that you have filled up your sp
Electronics Forum | Wed Aug 02 17:19:49 EDT 2006 | flipit
Yes 0402 8X4 embossed feeders exist for Panasonic MSR, Universal GSM, Contact Systems, and Mimot for sure. In the old days of 0402 components, 0402 resistors used to come in 8X4 paper tape but now I think most 0402 resistors and capacitors come in 8
Electronics Forum | Fri Aug 25 11:00:37 EDT 2006 | SWAG
Thanks for the advice. This is not a Universal camera. I removed the lense from a "blown" camera and installed a new CCD that I bought from a camera shop. I only see one ring that can be adjusted on the camera itself. Not sure if it's aperture or
Electronics Forum | Thu Sep 28 10:13:50 EDT 2006 | jdengler
Todd, I'm a big Fuji fan myself but a lot of that is because I have used them for many years. Changing to a different platform can be a challenge. IMHO, if the Mydata platform works for you (low volume, high mix) you may want to get another Mydata
Electronics Forum | Sun Dec 17 18:13:13 EST 2006 | bigdaddysoy9
GLOBAL MEMORY > ALTER MEMORY > MC_READONLY > MC_READONLY [AXIS-ERROR] > ID_MC_READONLY_AXIS_AREA, Then select Axes #9. If you make the changes here, then hit "update", the changes will take effect immediately. Then you can play around and figure out
Electronics Forum | Mon Jan 29 11:16:11 EST 2007 | geb
The front banks and head are fine. The rear ones aren't. When I look at how it has picked up a component, I have noticed that it is way off to the right (looking from the rear). This is ok for large components (TQFP, Tant Case A) but has caused the s
