Electronics Forum: gsm and axis and error (Page 1 of 2)

CP4 jerks all axis after power up and reset sw...

Electronics Forum | Wed Apr 11 17:00:28 EDT 2012 | rodrigo

Hi all, Our cp4 moves rather violently (jerks) all axis when the reset sw is pressed after power up. I've got all sorts of errors after boot up: Servo amp error: D,X,Y, etc Overtravel D,X,Y, etc D clutch error, power off machine We've checked all

CP4 jerks all axis after power up and reset sw...

Electronics Forum | Tue Apr 17 13:07:17 EDT 2012 | rodrigo

Well... after much headache I found a bad relay contact in M1CR1E. The good news is somehow the axis are no longer jerking. The bad news is that it still does not work. When I turn it on now it shows this: emergency stop (in red) waiting for reset

CP4 jerks all axis after power up and reset sw...

Electronics Forum | Thu Apr 12 17:49:35 EDT 2012 | rodrigo

I've done the Fuji flush. It does the same thing. We can not load proper again because it does not communicate with either the F4G or MCS/30. I was able to boot into mechanical mode at one point but now I can not do that either. This thing is drivi

CP4 jerks all axis after power up and reset sw...

Electronics Forum | Mon Apr 16 13:31:36 EDT 2012 | jdengler

Have you tried to restart F4G and/or MCS/30 after flushing the CP4 memory? I have occasionally ran into the comm error after a reset start. Leave the machine on and restart F4G or the MCS/30 whichever normally is hooked up. If it still won't commu

Panasert mvf2 pick and place error

Electronics Forum | Fri Dec 16 19:19:59 EST 2022 | gabriel1blue

Hi guys. I have an old panasert pick and place machine that I'm trying to get working, but now we encounter an error after we power up the machine but when we try to complete origin process. Everything completes the process except for DST-PSOI and af

GSM2 Universal user name and password

Electronics Forum | Thu Oct 25 19:53:42 EDT 2012 | sonavc

Thank It worked without the user name and password.When I try to zero axis I have other error unable write to global memory 5008. My machine, when turn it on i don't see the power to the Digiplan 8 axis modular and no bright on 24VAC on at servo co

AXI and AOI

Electronics Forum | Tue Jul 09 15:20:19 EDT 2002 | pjc

When you look at the capabilities of Combo machines they tend to sacrifice performance when compared to separate X-ray and AOI machines, meaning they don't do either the X-ray or AOI operations as well as a machine that was designed to do only one. A

Mydata Pick and place

Electronics Forum | Wed May 09 12:07:52 EDT 2001 | caldon

My personal favorite is the Siemens F series and the UIC GSM platform. Both Siemens and UIC have awesome resources for csp, flipchip and baredie processing - Siemens= Dan Baldwin from GaTech; UIC = George Westby from UIC labs. My second choice would

CGA devices - placement and vision

Electronics Forum | Tue Feb 27 12:43:43 EST 2001 | gsmguru

I've used an on-axis camera lighting for other components with a good deal of success. (But not for CGA's in particular) I would think it should work pretty well for a CGA application. I've done some pretty odd looking parts with this type of lightin

CGA devices - placement and vision

Electronics Forum | Mon Feb 26 14:06:09 EST 2001 | marting

We have just started to be involved with collumn grid array devices and are currently placing them by Universal GSM machinery. We have been advised by Universal that they supply "On Axis" cameras designed for visioning CGA devices, however the cost i

  1 2 Next

gsm and axis and error searches for Companies, Equipment, Machines, Suppliers & Information

Selective soldering solutions with Jade soldering machine

High Precision Fluid Dispensers
See Your 2024 IPC Certification Training Schedule for Eptac

World's Best Reflow Oven Customizable for Unique Applications
Sell Your Used SMT & Test Equipment

High Throughput Reflow Oven