Electronics Forum | Mon Apr 17 16:22:29 EDT 2006 | jaimebc
Are there any users currently working with Unicam and Universal HSP and GSM? If so, what offline interface are you using? USOS or UCT-52. Was there any conflict between Universal's interface and Unicam? Thanks
Electronics Forum | Tue Apr 18 16:30:17 EDT 2006 | ratsalad
At my previous employer we ran HSP - GSM lines. Some sites used CIMBridge, others Unicam. We all used UCT52, not USOS, for the HSPs. At that time we had 4796's, 4791's, and USOS 4.X on our GSMs.
Electronics Forum | Thu Mar 18 18:52:29 EDT 2010 | edwaterfall01
There is a retrofit kit to take care of the head cable problem that you mention. The s/n with 7P in it represents what is called the 7 Plus level of the head. There was one more level after that (09) for the GSM. The better heads mentioned in the
Electronics Forum | Mon Jun 02 11:01:19 EDT 2003 | emeto
Hi All, I am looking for some standart for pad and component dimencions. Is there anything more accurate than 30% and if so who works with it? Which libraries are based on some standart? Is there a catalog I can read or something in electronic format
Electronics Forum | Fri Mar 19 10:27:42 EDT 2010 | karlo
No clean pastes leave more flux residues. These can result in void formation and inhibtion of underfill curing. Selection of an underfill that is compatible with the flux residue is important. One company that has written about the effect of flux
Electronics Forum | Thu Nov 01 10:57:34 EDT 2012 | kris1128
Has anyone heard whether the elevation of a plant can effect solder joint formation? One plant at sea level, one at 7,000 feet elevation... same equipment and profiles, big voiding defects at higher elevation. I did a search and found no similar post
Electronics Forum | Fri Apr 10 20:04:00 EDT 2020 | jlawson
> Fabrication Format. With good tools Like Valor MSS PP you can handle the old (legacy flows) and of course better more modern flows all from one learning library solution = more effective first time right outputs
Electronics Forum | Thu Sep 23 10:28:33 EDT 2004 | JB
We are placing labels using a Hoover-Davis feeder with a GSM. Anybody else out there doing this? My question is: Are you using a special nozzle for this operation?
Electronics Forum | Thu Jun 26 09:56:37 EDT 2008 | gabriella
hello Zonker cheaper versions tws essemtec ivastech heeb fridge autotronik more expensive: mydata siemens juki uic GSM europlacer ipulse assemblion I will definitely miss some, but at least is some place to start.
Electronics Forum | Fri Mar 19 10:04:51 EDT 2010 | dilogic
Thanks for the explanation - it's hard to get any information from UIC when it comes to the older equipment, so I am stucked to this forum. Can you maybe give me a hint where to ask for such conversion kit?
