Electronics Forum: hardware (Page 1 of 44)

Reflow Pallet hardware

Electronics Forum | Tue May 24 18:56:02 EDT 2005 | russ

Try Pentagon-ems.com (might be right address?) They make their own hardware and i have purched various odds and ends from them before. Ask for Chad Haima.

Reflow Pallet hardware

Electronics Forum | Wed May 25 09:09:38 EDT 2005 | davef

For pallet hardware try: * Summit Precision 5825 S 25th St, Phoenix AZ 85040 Dennis Miller 602-268-3550 http://www.summitprecision.com sales@summitprecision.com * Southco http://www.southco.com

Reflow Pallet hardware

Electronics Forum | Tue May 24 18:20:05 EDT 2005 | gregcr

Hi All, I am looking for a supplier for the hardware used on reflow SMT carrier pallets. I know that there are many vendors who can make the pallets themselves, but where do they get the locator pins or spring clips. I'm not sure if each vendor ju

Reflow Pallet hardware

Electronics Forum | Wed May 25 06:31:46 EDT 2005 | ajaydoshi

We also want to use pallet method. How you work it out. We do have small PCB ( 30mm x 50 mm ) which have 0402 component & also micro BGA. Is it possible to make pallot for these component. thanks Ajay

Reflow Pallet hardware

Electronics Forum | Wed May 25 09:02:20 EDT 2005 | russ

Send your gerber data to the above mentioned or any other pallet Mfgr. If the assembly is designed with pallets in mind I am sure that one can be designed for your application.

Reflow Pallet hardware

Electronics Forum | Wed May 25 09:29:26 EDT 2005 | PW

In a time crunch, kapton tape works great. If you are using durostone or some material like that for carriers, make sure it is clean right after you machine it and the kapton will stick very well. We are low volume so we pretty much always use tape

Dek265 GSX Vision hardware error

Electronics Forum | Fri Dec 20 05:44:43 EST 2019 | hemantpang23

Thanks for your reply We checked all the hardware found ok voltages are as per specifications Suspecting software issue but don't have software for installation Please confirm if you have this software version 04.03 so that we can have last try

Dek265 GSX Vision hardware error

Electronics Forum | Sun Nov 24 15:01:09 EST 2019 | dekhead

dekhead@att.net

Dek265 GSX Vision hardware error

Electronics Forum | Sat Nov 23 06:05:31 EST 2019 | hemantpang23

Hello Everybody, I have a problem with a DEK 265GSX, I get this error message: Vision hardware error Controlled lighting not responding FATAL ERROR - REINITIALISE MACHINE I have found that this might be due to a broken wire and I have checked all

Fuji F4G PC hardware requirements?

Electronics Forum | Mon Apr 09 15:02:00 EDT 2018 | rodrigo

Hi all, Does anyone know the "preferred" PC setup to install F4G? We have several PCs but it only fully works on an old celeron PC that is extremely slow. In most other either the CP6 optimizer or CAD converter do not work. We have 2 lines with the s

  1 2 3 4 5 6 7 8 9 10 Next

hardware searches for Companies, Equipment, Machines, Suppliers & Information

Non-heated dispensing system

Small Parts Tips for as small as 100 microns
Selective Conformal Coating System

High Precision Fluid Dispensers
24h pcb prototype and assembly

Reflow Oven


fully automatic component storage