Electronics Forum | Thu Nov 11 23:09:35 EST 2004 | valuems
Hello There is several items that could cause this problem. And ken don't ever try to upgrade any software unless you are real sure that you have every thing on the hard drive backed-up. MPM just loves to sell the 2D codes over and over. There i
Electronics Forum | Wed Nov 17 08:27:35 EST 2004 | Steve
No-Clean has less activators, your profiling Does change. Look at the data sheet supplied by the solder manufacturer. Then tweak the profile based on your equipment, board type, size etc. Don't burn off the activators too quickly. Also keep your chem
Electronics Forum | Fri Nov 19 13:29:55 EST 2004 | jk@37h3r.net
Thx for the quick reply. We're just getting started with networking the machine - as we haven't managed to get TCP/IP functional, we just ftp data to our server as a backup. The floppy method has worked well for us in the past on another pick & pla
Electronics Forum | Mon Aug 22 08:09:51 EDT 2005 | cyber_wolf
The only time I have seen any Fuji IP need calibration is if you have had a serious crash, or if an axis or camera has been removed. Make sure you don't have something else going on. For instance check these things: 1.Check nozzle vacuum 2.Make sur
Electronics Forum | Wed Dec 01 09:13:05 EST 2004 | stefwitt
As far I know, Siemens has a patent for the joining method of the plastic nozzle and the ceramic tip. It is not glued together. Unless you use an acid dissolving the plastic, you may use any cleaning method and the nozzle shouldn�t come apart. Howeve
Electronics Forum | Wed Dec 01 15:07:16 EST 2004 | bdrobinson
Hey all, I am currently looking into switching from using Alcohol in our screen cleaner to Zestron SD301. I am confident that it will clean our stencils better, but the cost of Zestron is 3 times that of alcohol. Has anybody done any studies o
Electronics Forum | Wed Dec 08 05:41:49 EST 2004 | kanwal324
Hello I thind you are same Mr. Scott from whom once i had purchased inspection system in M/s Evershine India. Regarding your query, we want to inform you that we are mounting BGA with water solubel flux (special flux paste) from alpha metals and the
Electronics Forum | Fri Dec 10 08:42:37 EST 2004 | mattkehoe
We had some bad experiences trying to work with soldermask defined BGA pads. If the opening in the soldermask is right to the edge of the copper/pad without a space it can leave reside on the pad and nothing will stick to it. See http://www.sipad.com
Electronics Forum | Fri Dec 10 13:31:59 EST 2004 | Alan
We purchased the NXT about 4 months ago. Even though it is a new platform it has been running smooth with no hardware or major software issues. We are in a pilot factory so we don't get as much use out of it as some production facilities. Keep an
Electronics Forum | Sat Dec 18 00:00:26 EST 2004 | vinitverma
Hi Rob, I did'nt want to reply, but Base did, and rightly so about the dates. But that's not we're discussing at this moment. We started discussing about what's best for Serge. Now that he has decided for the NXT, good luck to him! But serge, in ca