Electronics Forum | Thu Aug 31 04:56:44 EDT 2023 | auriga2001
I would start with the following possibilities and solutions: Add extra solder to the pads with a Camalot dispenser; or preformed solder slugs placed as an additional component if there is enough extra pad to attach it without interfering with compo
Electronics Forum | Tue Sep 12 11:50:12 EDT 2023 | ttheis
I heard a similar story from a colleague on these machines. Same thing- head and beam not secured for transit and banged around whole trip. I think the beam ended up bent in that case and the machine could never be calibrated or repaired. Don't know
Electronics Forum | Wed Sep 13 12:50:44 EDT 2023 | kirill
Greetings, I would like to do a height calibration, because the laser of the machine seems to be out of control, I'll explain why: When I measure the height of a 0402 resistor, I get around -0.60 to -0.70, when I fix it on what the machines has measu
Electronics Forum | Fri Oct 13 10:44:03 EDT 2023 | yannick_herzog
Hello, thank you for your responses. Some time has passed since then. Unfortunately, we have been facing the issue of incomplete filling in the production when it comes to large openings in the template. This phenomenon occurs in both directions. T
Electronics Forum | Mon Oct 16 16:30:27 EDT 2023 | yannick_herzog
@MagyarT the error occurred across multiple PCBs throughout the entire job. So, for example, the issue isn't limited to just the first printed one but spans the entire duration. At what dimensions would you recommend a division? The apertures on the
Electronics Forum | Thu Oct 26 11:41:53 EDT 2023 | proceng1
We currently use Loctite 348 chipbonder to secure large parts that will hang under the board when reflowing the second side. Rework has been complaining that they sometimes have to remove those parts to make repairs and it's difficult to remove them
Electronics Forum | Thu Oct 26 11:17:09 EDT 2023 | sarason
The Philips CSM84 is also known as the Yamaha YM84 John Melson (jmelson) is an expert on these machines , he lives in the US. He is often active on EEVBlog and has been active on SMTNET in the past, asking many questions on this machine. My p
Electronics Forum | Sun Jul 10 13:24:48 EDT 2011 | sarason
I have finally updated my shareware SMT Machine program It reads Protel ( from Autotrax to Altium Designer) and spits out Yamaha/Philips UFOS, VIOS , Mydata, Fuji MCS2 CP642 CP732, Gencad 1.3, Philips, FCM, ACM, FTIP, Essemtec, Panasonic BM221 CM88,
Electronics Forum | Mon Nov 20 14:43:49 EST 2023 | proceng1
Before we purchased the printer capable of 1500mm stencils, we actually built a printer. We used a table top style where you squeegee by hand. Purchased longer tube stock and extended everything. It wasn't pretty and it wasn't fast, but it allowed
Electronics Forum | Mon Nov 27 10:23:01 EST 2023 | 1_manuel
Hello everyone, I would like to incorporate comments into our stencils. We have a stencils where it appears as though text has been etched into it. Since no one in our team knows how this was done, I obtained an etching pen (Gimark KBS5006), which is