Electronics Forum | Fri Jun 10 08:08:54 EDT 2005 | ajaydoshi
thanks a lot for info. If you have some photo, pl. send at ajay_doshi@utlindia.com Photo will help to understand better ajay
Electronics Forum | Thu Jun 09 07:23:03 EDT 2005 | ajaydoshi
We have BTU150 paragon. Frequent failure obseve in cooling fan capacitor. Cooling zone temperature reach up to 80 degree centigrade How to prevent same. ajay
Electronics Forum | Thu Jun 16 09:41:23 EDT 2005 | johnbooth
Hi just reading your problem with your BTU oven. We have a similar problem with our oven, did you find a fix for it.
Electronics Forum | Fri Jun 17 00:19:59 EDT 2005 | ajaydoshi
Hi just reading your problem with your BTU oven. > We have a similar problem with our oven, did you > find a fix for it. Not solve yet in a conclusive manner. But problem likly from fan speed & water supply. thanks Ajay
Electronics Forum | Mon Jun 13 02:54:18 EDT 2005 | Adnahn
Is your machine programs gang picking? Work out a machine set-up for commonly used components to have a fix location on the machine ( preferably on the side the operator spends the least time ).Most of your change overs take place on the front of the
Electronics Forum | Thu Jun 23 19:19:33 EDT 2005 | james
After a year of making up part lists that we need duplicates for, and having nothing more happen, and yet be asked to decrease the change over times, you can only bang your head against the wall so many times.
Electronics Forum | Tue Jun 21 14:36:33 EDT 2005 | tds
Please go to http://www.purexltd.co.uk for information on fume extraction. If you have any questions please give me a call @ 330-724-3333 Scott
Electronics Forum | Thu Jun 09 16:13:24 EDT 2005 | PCBER
Hi, I am having trouble finding PCB material per IPC4104/21, Type L210938C2/C2BA. Can somebody please suggest me who might can supply this? Thanks in advance Regards, PCBER
Electronics Forum | Tue Jun 14 11:02:53 EDT 2005 | Stefan
I would rather take Bobpan's advise. If the placement is calculated from the center of two fiducials, than the placement should be off by 1/2 of the distance of the two fiducials, but not by the offset of that one fiducial. However, your approach in
Electronics Forum | Fri Jun 10 20:30:58 EDT 2005 | fastek
Doesn't PFA have available a calibration board kit similar to Fuji PAM? If they don't, they should.