Electronics Forum | Wed Oct 20 11:39:01 EDT 2010 | mikesewell
On our Fuji NXT and AIM machines I never program local fids...we place down to 16 mil fine pitch and BGA, uBGA, multirow QFNs with no placement issues. Most boards are panelized in an array and we have corner fids added to the rails. Regards, Mi
Electronics Forum | Fri Oct 22 11:18:59 EDT 2010 | davef
Look here: http://www.warehousesolutionsinc.com/automated_vertical_storage.html#Why We receive neither benefit nor have any relationship from the company linked above.
Electronics Forum | Thu Oct 21 15:30:56 EDT 2010 | remullis
Search on Attrition, I think most companies start around 2% across the board. I have adjusted mine higher for 0603, and parts where I experience tape issues constantly. We are running parts with date codes back 2006,2008.
Electronics Forum | Mon Oct 25 17:03:43 EDT 2010 | jamyboy
I am wondering why the PnP manufacturers are not adding more modern part packages to their databases? Let me know what types of packages you are looking for and if I have them I will send you the data, from our database.
Electronics Forum | Thu Oct 28 16:15:24 EDT 2010 | duchoang
If everything else is OK, capacitors quality could be the cause of this issue. Some caps could have been contaminated or the metal mass not even between two ends. Try different kind (manufacturer)of cap.
Electronics Forum | Fri Oct 29 07:10:40 EDT 2010 | scottp
I agree with DucHoang. If your board and reflow profile have not changed then I would suspect incoming parts. We've seen tombstones when a chip supplier had plating problems.
Electronics Forum | Thu Nov 25 05:01:05 EST 2010 | raghu
Thanks for your reply sir... Please tell me, materials you have suggested are reworkable or not...?
Electronics Forum | Tue Nov 30 15:40:09 EST 2010 | diamondmt
Thanks for your reply sir... > > Please tell me, > materials you have suggested are reworkable or > not...? Yes, The material is reworkable, go you Zymet's website you will find all the information located there.
Electronics Forum | Fri Nov 05 07:53:01 EDT 2010 | glenseely
What about trying to clean these stencils with a proper stencil cleaner? This way you wouldn't have to worry about sending anything airborne.
Electronics Forum | Tue Jan 18 09:42:09 EST 2011 | mmjm_1099
CL, Can you help me out here. We currently have a MV2 and a MV3 and I am wondering if there is an option to move programs back and forth for these two versions. I hope Mirtec thought this through and didn't oversee this option.
