Electronics Forum | Sun Dec 12 17:06:33 EST 2021 | rajeevkul
Hello, We have a Philips CSM Comet II machine, now its hard disk is not getting detected and we tried to recover the data from that disk but we were unable to get the data. So, we are looking for software/data for the Philips Comet II machine. P
Electronics Forum | Tue Dec 21 12:28:11 EST 2021 | vtdivtecs
hey all, I had a comically bad failure yesterday while working with my pick and place, a part got dropped at exactly the wrong moment and flung a bracket up into the tool path, severely damaging the hydra controlboard that is next to the x camera. T
Electronics Forum | Fri Jan 28 12:34:13 EST 2022 | jseewald
Generally, a well-designed assembly should not require man-handling of the PCB to the point where it is deflecting like this. Is the housing too small? What kind of clearance do you have and is there anything you can do to alleviate the issue (clos
Electronics Forum | Thu Jan 27 19:01:11 EST 2022 | Claude_Couture
We have to make several different kits containing 5,7 or 17 resistors (axial leads). These resistors are supplied in ammo boxes or reel. We used to cut the tape by hand with scissors, but we need to cut 10000's of these per week. Has anyone ever seen
Electronics Forum | Fri Feb 04 14:15:10 EST 2022 | emeto
If the part makes it in the right location by leads touching the paste in the right location, you have very few places to check. 1. Check parameters like air kiss, or some timings you can keep the part down in placement position for a while. Sometim
Electronics Forum | Thu Feb 17 16:25:20 EST 2022 | mihai_voivod
I'm not understanding what roller with closed sides you are referring to. My edge roller bearing (brass color) has a lip on the side. The middle roller bearings (silver) have a slightly bigger lip. These are the roller bearing shown on the manufact
Electronics Forum | Wed Feb 23 13:00:48 EST 2022 | stephendo
Every now and then I will be asked if I remember that place I bought that transformer. Often when we get new equipment we will get a new transformer. Not only will you find differences between DEK printers of different names and models, you will fin
Electronics Forum | Sat Feb 26 18:37:21 EST 2022 | oxygensmd
I am using SiPlace S20 and F4 machines. Both of them handle 0402 without problem. A newer machine, like S23 or S25HM is way better and accurate, S27HM can place smaller parts too. We are using EKRA E5 (2000) which can print this size without issues.
Electronics Forum | Tue Mar 01 04:25:48 EST 2022 | shrikant_borkar
Dear Members Please help me to support to one of my client does not have co planarity in his SIPLACE D1i Pick and place machine. We would like to understand why this Lead lift up issue has passed thru pick and place.? Is there any method by keepin
Electronics Forum | Wed Mar 16 21:50:25 EDT 2022 | m79d
A few years ago i too was making up some kits, i was cutting resistors,diodes,chokes and only those who have experienced this situation will know how time consuming this simple task can be. I too looked around for some type of machine but couldn't f
