Electronics Forum | Fri Mar 23 02:22:13 EDT 2007 | bvdb
Latest information: The IP-1 packed up completely this week showing an assortment of weird error messages. The CPU was still running but the +24VDC power supply LED was off and nothing would work (emergency stop mode always enabled). Pulling the +
Electronics Forum | Tue Mar 20 04:13:53 EDT 2007 | chrissieneale
Guys, Unfortunately breakaways aren't an option - they are large boards and we already have problems hand placing components and probing them. The ridges - yes we can remove a few - and that solves one problem (boards bashing together and damaging
Electronics Forum | Thu Mar 22 06:28:08 EDT 2007 | Hussman
Anyone ever design an external thermocouple that connected back to an enclosed PCB? If so, how did you make the interconnect or solder joint to the board? Did you change metals to a solder friendly material? The problem we have is an external t-
Electronics Forum | Tue Mar 27 15:18:19 EDT 2007 | jmelson
Chrisw said : We have used the older and newer style Mantis scopes and our assemblers love them as you can do rework in a very natural and comfortable seating position. It took me a while fooling around to get everything in the right place, but I c
Electronics Forum | Wed Apr 04 18:25:07 EDT 2007 | darby
Don't think much of the people who run the line do you mate? "BUT is operator dependent, so if he feels lucky just change the reel without verification and machine will not stop if he didn't follow the procedure having a high probability of Wrong co
Electronics Forum | Mon Mar 26 08:52:19 EDT 2007 | realchunks
Hi J, Yes, we do too. Funny thing is I was just looking at this last Friday. We call it sharing the bottom of the barrel. Typically it's just Process Engineers stuck down here, but from time to time, Maintenance gets stuck down here too. When in
Electronics Forum | Fri Apr 06 16:17:07 EDT 2007 | pima
Let me just shortly explain why do I open this thread. In my corporation in different plants we use same components at the same machines in different products(Fuji machines). I would like to create kind of global database of shapes ( its in FujiFlexa
Electronics Forum | Thu Mar 29 08:46:23 EDT 2007 | realchunks
Well I DO KNOW! Hi aj, 100% on the lead pads and 50% reduction on the center pad if you do not use thermal vias. If you do use thermal vias, you may need to increase the amount of paste needed, but not by much. 50% will be a good start. After re
Electronics Forum | Wed Mar 28 12:46:50 EDT 2007 | realchunks
Rob is right, you do need to dispense paste or pre-forms when using a laser. Although the Panasonic Soft Beam has a wire despenser. I've seen laser soldering and it does work on smaller stuff. Doesn't work well on connectors even after preheating.
Electronics Forum | Thu Apr 12 16:59:24 EDT 2007 | flipit
If you want an inexpensive, good, somewhat dedicated, solution, then I would use a desktop wave pot like Wenesco or better yet Air Vac. The PCBRM10 or PCBRM12 from Air Vac may still be available. Can find on Ebay also. They have a quick change, pr