Electronics Forum | Sat Apr 01 07:49:12 EST 2006 | cyber_wolf
DAX ! You don't need to remove the entire shaft assembly to clean the clutches. You can just drop the top portion of the spline out to get to them. It seems as if you have already taken off several shafts. I would HIGHLY reccomend that you do not
Electronics Forum | Thu Mar 23 19:46:28 EST 2006 | gipos
Hi Criss, It is Universal 4816 CRS.It have touch screen and "Keypad sound" speaker.Each time you touch the screen it give nice sound.I have tried with universal in EU but still waiting for an answer. It is from ETS.On all the control PCBs it is ETS p
Electronics Forum | Tue Jan 24 07:43:45 EST 2006 | Chunks
Q: If you do not use a selective wave pallet does this not leave the possibility of solder flowing up thru the Via's on the board? A: No. Your board house can cover your vias with solder resist. Your board house can plug the vias. You can cover t
Electronics Forum | Tue Jan 24 19:00:15 EST 2006 | MikeF
Graham Naisbitt is definitely an expert on conformal coating, he has posted answers here for years. Check your material to see what the cure mechanism is. Most urethanes need moisture from the air to cure, the higher the relative humidity the faste
Electronics Forum | Sun Jan 29 14:10:14 EST 2006 | gipos
Hi GS, We are contract manufacturer for small series of electronic equipment fully trained for SMT.Making mostly RF with only few QFPs,TSOPs...SMT machine assembly was made by local subcontractor when needed. Recently we acquired two Juki 730 machin
Electronics Forum | Fri Oct 13 15:03:49 EDT 2006 | stepheniii
When I started using our ESV-304 the CAD converter would crash if there was a part already in the library with an alias. With the two cameras we can only put parts from one camera in the library. And our current library would be totally useless with
Electronics Forum | Mon Feb 20 14:45:51 EST 2006 | dannyleach
Histroically we have designed our pcb panel configurations around the v-score format. The QA Dept of our company is is suggesting that we revert back to tab-routing as away to avoid damage to senistive components like large package ceramic capacitors
Electronics Forum | Tue Feb 28 10:18:35 EST 2006 | Steve Gregory
I just went through the same problem. We have an inductor that is made with a bundle of 30-strands of Litz wire that is vaccuum coated with varnish, and have the ends of the wire bundles tinned that we have to solder to SMT pads on the board. The ind
Electronics Forum | Thu Feb 23 09:19:38 EST 2006 | Bruce
for years we have all delt with the choices of endless products to use as flooring to create an ESD safe area for electronics assembly, I have spoke with "ESD TECH's" in the past that have told me a "clean / Bare concreate floor" provides as much di
Electronics Forum | Tue Feb 28 14:32:26 EST 2006 | masrimhd
As I know, the encapsulation effect occurs only with rosin based fluxes. So if you have a PBA soldered using RA Flux, you should either wash it well, or leave it alone and it will be safe. For NC process the story is different because there�s no re
