Electronics Forum | Fri Feb 27 12:06:03 EST 2004 | jseagle
A 20 x 20 frame with the image centered will drop in IF you have a printer with adjustable rails for the stencil, the rails move in and out to accomodate 29 x 29 to smaller than 20 x 20. Otherwise, you will need the adapter. James
Electronics Forum | Tue Mar 09 18:14:07 EST 2004 | davef
We're not current in recommending suppliers, but we have discussed nitrogen storage previously here on SMTnet. Search the Archives to get started.
Electronics Forum | Sat Feb 28 18:09:49 EST 2004 | Indraneel
Hi, I am having some problem during reflow of solder paste. There seems to be leaching of solder paste. Can anyone let me know some solutions to minimize it . Rgds Indraneel
Electronics Forum | Mon Mar 01 09:20:02 EST 2004 | chrissieneale
We had this problem not long ago and changed to the remountable foils. They are as good as the orignals but they cost less and are practical to store. All our stencils come from DEK and they have a nice little (overpriced) cupboard, if you're working
Electronics Forum | Mon Mar 01 09:58:23 EST 2004 | dgjjr
We have been using unmounted stencils for 4 years. Easy to store and less expensive. Our stencil supplier gave us a pair of universal mounts for our printers. Watch the sharp edges. We haven't had any cuts but the potential is always there.
Electronics Forum | Mon Mar 01 11:08:07 EST 2004 | adlsmt
We have used them for 6 years now. No issues. The frames are not universal so you need to pick one vendor. IIT has done a great job for us and the standard turn is 2 days for laser cut for $150.00.
Electronics Forum | Wed Mar 03 11:22:51 EST 2004 | Simon
DEK have this new system called VectorGuard, which are remountable foils with protective edges - worth a look and may save the odd finger!
Electronics Forum | Wed Mar 24 07:31:48 EST 2004 | Doug
If you are interested in building or having someone build a storage unit, I will send you a photo of what I use. Let me know. Doug
Electronics Forum | Wed Mar 03 07:26:16 EST 2004 | pjc
AP24X is old model. Some parts are getting hard to come by. Check if the vision system is Cognex 2000 or 5000 and what the computer is. It may have been upgraded. Otherwise, its a good printer.
Electronics Forum | Thu Mar 04 10:20:30 EST 2004 | Ken
If an OEM and room is available on the PCB....have pin location aids silk screened on the boards. Groups of 10 are typical. might look like 1.........10.........20.........30 continue this around the device. Otherwise, ???
.gif)
