Electronics Forum | Tue Nov 01 10:23:22 EST 2005 | Jerry findale
I have been using a service. I search around and found that the other manufacturing services just give you cross referance parts. It cost me a lot in time and effort because the parts they cross referanced for me just turned out to be simular. We fin
Electronics Forum | Fri Oct 28 15:45:41 EDT 2005 | vickt
The older generation "GSM" feeders will work fine on the multifunction variations of the AdVantis Platform, but will not physically work on the Lightning based AC30L. The AC30L uses a 42v feeder interface, while the MF versions have both the new 42v
Electronics Forum | Wed Nov 16 09:43:39 EST 2005 | Terenzio Facchinetti
Concerning RoHS testing I would like to inform you that a service is provided to achieve compliance by UL: Underwriter Laboratories. Service consisting of (all or each can be requested as stand alone service): - Preliminary investigation (what I ha
Electronics Forum | Thu Nov 17 07:31:06 EST 2005 | Gordon Biezeveld
Dear Amol, UL has a world wide Restricted Substances Compliance Services program that you might find interesting. Just send me an e-mail in which you tell me both your office adress, and/or type of product - I will inform you, whom best to contact.
Electronics Forum | Wed Nov 02 17:08:32 EST 2005 | 1startical
Dear Dave, Hope that you find good help for your issue. I have read through your thread and see that you're stressing out over a financial vs long term benefits, I would like to present some numbers to you. $75-$175 per hour for a "Quad expert" sup
Electronics Forum | Fri Nov 04 22:16:56 EST 2005 | mika
I forgot to mention something about the local fiducial marks: In the "old days" where board stretch was a factor to count with; the use of local fid's around a fine pitch component was sometimes necessary; not to forget that the pick & place machines
Electronics Forum | Fri Nov 04 02:23:58 EST 2005 | grantp
Hi, Yes, you will save a lot of money in the end. From what I have experienced you cannot heat up a oven full of air, and cool it down fast enough to match a suitable reflow profile. So passing the board through the zones using an inline oven is th
Electronics Forum | Thu Nov 03 14:48:59 EST 2005 | Jason Miller
I've been tasked with identifying what world class quality should be for my company's products (custom military/avionics power suppliers & custom transformers/inductors/magnetics, see http://www.hirelsystems.com for more info). I can't get a shred o
Electronics Forum | Tue Nov 22 10:46:46 EST 2005 | A Total Green Planet Solution
Try using a contrast filter. This seems to help. Also on the camera it self there is a white level control. Adjusting this may help. The bad thing is it may affect all your other profiles. Some times an easy fix is to have a screen print mark close t
Electronics Forum | Fri Nov 11 09:38:41 EST 2005 | Rob
Hi, There are 2 main steps to reducing EMI from a product. The first is to minimise it at source with smart design (keeping signal traces short, lots of decoupling etc). There should be design guides available from internet seach engines. Many ma
