Electronics Forum | Fri Jan 03 12:48:23 EST 2020 | cyber_wolf
Besides correct stencil design, solder paste chemistry can have a profound effect on voiding. People will tell you reflow profiles. I have never in my career seen a reflow profile have any effect on voiding unless it is grossly off.
Electronics Forum | Thu Dec 31 11:48:48 EST 2020 | ecogroup
Have Aqueous Technologies SMT1000 . Need help, looking for a copy of the drivers . I have the flash program . Any assistance would be much Appreciated ! Thanks, Madel
Electronics Forum | Mon Jan 18 00:52:20 EST 2021 | richard07292
I have the iSpector Box for about 2 years. The question is, when you have 1000 components to check, 150 to 450 failures that are not bad parts. Are there people who have the same problem?
Electronics Forum | Fri Mar 11 21:14:17 EST 2022 | cbeneat
We don't have 6000's, but have you checked the computer? All of ours have the manuals on the hard drive.
Electronics Forum | Thu Jun 02 21:27:59 EDT 2022 | rdssmt
Jerry thank. I did check this but I going to change the sensor. Do you have CP643? This machine I have 2 years that not power on and lost the proper, do you have one copy? Thanks.
Electronics Forum | Thu Nov 03 14:30:39 EDT 2022 | ttheis
I have always been a fan of Universal Instruments; the machines have been good to us. They have a re-manufactured division as well if you are looking for something a little less than new.
Electronics Forum | Mon Jul 31 18:34:30 EDT 2023 | emeto
I have done some of these. Pin in paste process with generous amount of paste to fill the barrel properly. Pick and place process is tricky too, but if you get them on tape and reel, you can have a custom nozzle and have them placed.
Electronics Forum | Thu Oct 26 10:48:17 EDT 2023 | bobpan
It depends on the motherboard that you have. Some dont have a battery but have a Dallas BRam chip. Bob
Electronics Forum | Thu Nov 16 22:55:14 EST 2023 | dwl
Do you have to have at least 1 nozzle on the head? I think the lightning heads you had to have at least 1 nozzle on the head or it would give an error.
Electronics Forum | Sat Feb 03 01:57:17 EST 2024 | heinar
Hi, does anyone have quad QSP-2+ with motherboard 5x86. I, needed bios setting both computers. Have manual, but different. I have bios settings for 4x86, when needed then ask.
.gif)
