Electronics Forum | Tue Oct 18 06:04:39 EDT 2005 | Rob
It depends on a number of factors - including as Russ pointed out, complexity (sometimes you need to create very complex profiles if you have large BGAs and other such components, which require at least 7 heated zones), then you have size, required l
Electronics Forum | Tue Oct 18 12:23:04 EDT 2005 | DannyJ
To the Heller question... I have had a few minor bad experiences with Heller. On the 1800 series, redid the movable rail section, which required complete disassembly of the offload end of the oven. A little bit of forethought in design may have ha
Electronics Forum | Wed Oct 19 13:45:16 EDT 2005 | bobpan
hahhaaha....its robust and reliable.....you wont have to fix it......remember.......hahhahaha
Electronics Forum | Thu Oct 27 03:15:47 EDT 2005 | mike
What country are you from. Have you spoken to the local distributor yet ??
Electronics Forum | Thu Oct 27 09:07:50 EDT 2005 | russ
Is anyone aware of the spec for tape if any?
Electronics Forum | Thu Oct 27 13:22:39 EDT 2005 | russ
Thanks for the spec Greg, For us it is the stiffness.
Electronics Forum | Thu Oct 27 14:17:49 EDT 2005 | james
I agree the stiffness is definately the problem.
Electronics Forum | Fri Oct 28 14:05:44 EDT 2005 | SuMoTe
Have you tried 'Ink-stamping" them?
Electronics Forum | Fri Oct 28 14:27:11 EDT 2005 | MoonMan
You have to stamp or etch them. MoonMan
Electronics Forum | Fri Oct 28 03:59:28 EDT 2005 | Frank
Contact your local Juki distributor and buy the English version of software. There is no way to change the version you have.