Electronics Forum | Mon Jan 05 11:12:16 EST 2004 | gregp
Barney, Please tell me who it is that told you this customer cannot get support. Certainly it is not the customer himself. We have been at this customer with top level engineers at the drop of a hat from day one. As for the C7 it is part of the new
Electronics Forum | Fri Jan 30 16:49:21 EST 2004 | Mike Zadrejko, Videotek, Inc.
Barney, We currently have 3 Contact Systems machines, (1) C3AV and (2) C3AVXs and I can't say enough good things about the machines or the support. It has always, always been there since we started dealing with them in 1991. The Service Dept personn
Electronics Forum | Tue Jan 13 12:43:24 EST 2004 | cyber_wolf
I have to disagree with Fastek. We only use dedicated tooling on our AP machines. Dedicated tooling pros: *Set up time is 90%+ faster than universal tooling. *It is very easy to train operators to install dedicated support plates. *You do not need
Electronics Forum | Tue Jan 13 18:13:01 EST 2004 | adlsmt
To be fair, we are not replacing them. I also have a 3Z. The 3AV is too slow for us. The 3Z is a good machine and we are keeping it. Its in line with a Panasonic MMCG3 chipshooter. We now have a Topaz also inline with a Panasonic MMCG3 chipshooter an
Electronics Forum | Sun Feb 15 21:35:34 EST 2004 | charlie
I am looking to purchase a tape and reel > machine. I have advertised on SMTnet for one. I > have no experience with this type of machine, so > can anyone recommend a brand to buy or one to > avoid. I require a machine to reel up parts from > st
Electronics Forum | Sat Feb 07 22:03:25 EST 2004 | Dean
I have run into this before with a P&P machins. In one instance the 4 levels of passwords were published in the first revision manuals. OK, guess tech editors missed that??? FYI Anyways, I just wanted to mention that changing or altering software
Electronics Forum | Thu Feb 05 14:33:32 EST 2004 | paul_bmc
I am in the process of programming my first PCB on the CS-400E machine and am having problems. I am too impatient to wait for the manuals on order so I thought I might see if someone out there might have some suggestions. I have done some research o
Electronics Forum | Mon Feb 16 19:02:19 EST 2004 | Jaycustr1
I am thoroughly amazed at the defeatist attitude of most of the reply posts. Ah well, let's let them have it without a fight. Do you realize that there is no next best technology any more? What you mean by not so easily exported technology will not
Electronics Forum | Tue Feb 17 10:08:17 EST 2004 | russ
Do you have a bake oven that will reach 200C? You could bring a batch of boards up to temp and then start the pluckin'. A sfar as the solder goes if you apply flux to the leads they remove very clean as far as solder goes. To remove the flux we pl
Electronics Forum | Thu Mar 04 22:57:32 EST 2004 | Ken
I have an Aqueous Technologies stencil cleaner and I can see many SAWA advantages over the "larger" machines. 1. Floor space savings 2. Chemical cost (up to 30 dollars a gallon) 3. Hand ultra sonic cleaning could never destroy the webbing and bon