Electronics Forum | Wed Aug 09 14:36:30 EDT 2006 | cyber_wolf
Swag, I think I have mentioned this on the forums before....The only way to truly get those chains clean is to use a foaming oven cleaner. It requires several applications to get them completely clean. Also, you need to remove the tracks and clean t
Electronics Forum | Wed Aug 09 13:30:29 EDT 2006 | dsoohoo
I am searching (though so far unsuccessfully) for an SMT adhesive that I can get in both white and black as opposed to the common red. My company does a lot of work with LED's and the red bonder has a tendency to affect the light output of LED's with
Electronics Forum | Mon Aug 14 11:30:25 EDT 2006 | SWAG
We had centernest to I/O track alignment problems that were not predictable on 3000. Z-axis height seemed good with relation to I/O tracks but y was misaligned. Ended up replacing y-axis stepper and trouble went away. Also have had trouble with z-
Electronics Forum | Thu Aug 17 09:24:28 EDT 2006 | markb
We are looking to possibly counterbore a coule of thru holes in one of our PCBs. We would counterbore the top side, and the only trace is coming out of the bottom side. The reason is to mount some LEDs flush with the board. They have some flash wh
Electronics Forum | Thu Aug 17 17:36:08 EDT 2006 | slthomas
I don't have any data (haven't tried this), but it doesn't take much thought to see that determining the risks associated with simultaneously applying compressive and rotational forces to the end of the barrel, not to mention chewing up the copper, i
Electronics Forum | Thu Aug 24 16:08:18 EDT 2006 | Frank R.
Thanks Bill and Dave for your help, Sorry Dave if I didn't search for information in archives. After wave process we have 2 ICT, 2 AOI machines 4 PVA conformal coating machine that will be use on 3 different lines. The quind of automation I want to
Electronics Forum | Mon Aug 21 10:47:48 EDT 2006 | FredC
Hello Mika, I just checked a windmill and a test nozzle we have on the bench. The useful travel of the nozzle before the risk of the crosspin getting stuck in the loading gate is 1.5mm, if it gets stuck it is the nozzle is 1.7 up. If the cross pin is
Electronics Forum | Sun Aug 27 06:32:24 EDT 2006 | mika
Many Thanks to You all. I think we should be ok with the majorty of our cap's if we set the comp. thicknes to 0.2 mm less than the actual size to be able to compensate for the variable thicknes from different wendors for a certain component. Do You
Electronics Forum | Wed Aug 23 04:04:25 EDT 2006 | bobpan
No Steve, Having the chance to work with newer equipment and 'latest and greatest' technology opens your eyes to older 'dated' machines limitations. If your growing and you may be going towards 0402's and even 0603's.......its better to upgrade and
Electronics Forum | Tue Aug 29 19:54:08 EDT 2006 | darby
Dave, The parking is difficult but don't believe the reviewer about the getting a table business. I just walk in and my waiter; Luigi the Unbelievable, goes to my regular table and says, "You! Jackman, Gibson anda McPherson - piss off! Mr Jarvis and