Electronics Forum | Tue Sep 10 15:27:30 EDT 2013 | gbarb
I have a design that requires the PCBA to be potted. However I have a shrouded header on the board that I need access to. Is there a way to cover this header during the potting process and then removed the cover after the potting material has cured
Electronics Forum | Tue Sep 17 14:31:17 EDT 2013 | paul_bmc
I am looking for eveyones opinion on this cleaning process. We currently have both inline aqueous and batch for cleaning both water soluble, rosin and no clean fluxes. We have evaluated the vapor degreasing cleaning process and discovered equal if
Electronics Forum | Thu Sep 19 11:11:21 EDT 2013 | northstarmfg
I would be looking at used or refurbished equipment with that budget. We had a similar budget a few years back and ended up purchasing a rebuilt pick & place machine. We have been extremely happy with the results Don't forget that you will need t
Electronics Forum | Thu Sep 19 12:29:57 EDT 2013 | deanm
What is your plan/budget for your reflow oven and paste printer? Those are equally important as a placement machine. Have you factored in other costs of in-house assembly such as inspection, moisture sensitive device storage, rework tools, cleaning p
Electronics Forum | Sat Oct 05 23:03:05 EDT 2013 | tonnyneoden
Dear Jvadillo, Ok,it doesn't matter ,thank you for your reply. We are researching and developing our new machine which have vision systerm can ensure the precision about mounting for a long time .Maybe will come into the market next year and hoping
Electronics Forum | Sat Oct 05 23:05:04 EDT 2013 | tonnyneoden
Dear Jvadillo, Ok,it doesn't matter ,thank you for your reply. We are researching and developing our new machine which have vision systerm can ensure the precision about mounting for a long time .Maybe our new machine will come into the market next
Electronics Forum | Fri Sep 20 13:44:17 EDT 2013 | cyber_wolf
There is no 8mm wrenches involved. The procedure is a little to extensive to post.The only hand tools required are the crows foot jig a set of allen wrenches and an adjustable wrench. You have to remove the shaft crown to get the clutch out. Again..
Electronics Forum | Sun Oct 06 12:28:08 EDT 2013 | christian01976
Hello. I just can say: buy it! We have some older Yamaha machines (Assembleon in europe). Topz X2, two Opal X2 in line and a line of MC24 (YS24) and MC1 (YS100). And those machines are really good. I have no bad things to say about them. Greetings
Electronics Forum | Wed Sep 25 11:12:48 EDT 2013 | derekj
Hello all. Running a new to us Omniflo 5 and realized that there is no ports for thermocouplers or wires to do any profiling. There is a space on a front panel for thermal profiling inputs, so I am assuming it was optional, just not spec'ed on this m
Electronics Forum | Thu Oct 10 04:12:37 EDT 2013 | alexeis
Hi, We have software tool, called TopoQC, that displays topologically CAD view with failures and calculates solder points by one click. Also, you can calculate DPMO & Six Sigma values on the same screen. You can read about it on our website: http:/