Electronics Forum | Tue Aug 05 11:32:53 EDT 2014 | hegemon
SFC and PhilC To answer one open question, and I too have difficulty with little stencils and preforms..... If you can manage, try dipping your balls in paste. It adds the right amount of flux and a bit of metal as well. We have a nice Rework Stat
Electronics Forum | Sat Sep 06 00:24:37 EDT 2014 | padawanlinuxero
Hi, anyone here that can provide the DEK 07sp11 > installation software. (or newest version for > Typhoon series) ? I can't remember if the 07sp11 > was a full installation or only a patch. If only > a patch, I will need the previous full > inst
Electronics Forum | Wed Sep 03 15:18:12 EDT 2014 | chemers
I am looking for some help for where to look to fix this MY12 problem. We started the machine after the weekend and this error code comes up during initialization. F-MOT-MSETDYN X/12: Position counter dead MyData tells us our only option is to have
Electronics Forum | Tue Sep 16 09:39:33 EDT 2014 | emeto
Hi there, It looks weird how you handled the problem. Just a thought, but would you check the stencil and may be recut a new one, making sure you have the image exactly in the center and have the fiducials exactly where you want them and the frame
Electronics Forum | Mon Sep 29 18:37:22 EDT 2014 | spoiltforchoice
Don't know if you can do it on a MyData, but I have found that I lower the rate of failed pickups on our machine by altering the placement order of devices. Specifically insisting it does not attempt to pick sequential parts from the same lane. Of co
Electronics Forum | Fri Oct 03 05:59:20 EDT 2014 | cmchoue
Does anyone well know in "via hole design in ground pad" I have few question that i want to know the answer,thanks. 1.Thermal performance compare about a.Via Full Stuff (top/bottom:solder mask and inside is air) b.Via Half Stuff (bottom:solder mask
Electronics Forum | Thu Oct 16 12:35:03 EDT 2014 | upguy
We have tpsys 1.5.18 on our TP9-UFP. We are attempting to run "Optical Centering Calibration". Following the instructions in the manual, we have centered the cross hairs on the camera frame, loaded a "base" board then the L-19-447 calibration boar
Electronics Forum | Sun Dec 21 04:27:44 EST 2014 | leadthree
Are you really sure that related to my issue? Anyway, in the meantime I experimented a bit with a PVC supplier and now I have a soft PVC that can handle my 185°C (365°F) for 90 Minutes. It becomes a little bit yellow - the previous got cat-black.
Electronics Forum | Mon Oct 20 21:26:57 EDT 2014 | richardciccarone
I have seen a couple of references to Black Tar, Not Black Pad. Apparently, it occurs only on the solder side of PTH's after wave solder and primarily on the edges of the land. It is characterized by a black coloration (Not Ni corrosion?) and non-wet
Electronics Forum | Mon Nov 10 04:05:56 EST 2014 | moshe_shmuel
We are working with SMT lines consisting of machines opalxii after 5/6 years of operation have appeared problems in operation of the engines on the x and y axes. I disassembled the engines from the machine and I removed the cap that covers the encod