Electronics Forum | Mon Jul 08 16:03:06 EDT 2019 | slthomas
My recollection is that there is a carrier clip locator that positions (centers) the clip in front of the CTA. Has the adjustment on that been confirmed as well? (Edited because some of it's coming back to me!): I think there is a diamond shaped pin
Electronics Forum | Wed Aug 26 18:36:17 EDT 2020 | serge_pirog
Hello. Could I ask you for help. We have DEK Europa. We have changed ProFlow to squeegee head with feedback. After this during solder paste printing system shows the difference between set pressure (9 kg) and real pressure (7,5kg). I have read manual
Electronics Forum | Tue Nov 03 10:37:04 EST 2020 | spoiltforchoice
If you are looking at a single machine, you are after a true "flexplacer". There are a couple of options it will depend a bit on the spped you want and how many different parts you need too load at once. Best: Europlacer Iineo for pure flexibility o
Electronics Forum | Tue Jan 05 21:24:34 EST 2021 | rmitchell
We use to have to replace the "dog" tube when it got rounded out or worn a little. If you you already cleaned it and can see the red light going off and on when you gently push up on the nozzle it is just not seeing in time and it gives the nozzle c
Electronics Forum | Mon Feb 08 23:16:07 EST 2021 | mendez
Hi, so I was able to turn the machine on for a few seconds. It looks like the IC on the LCD doesn't have goo contact because it's very hard to keep the machine operational. I was able to see the table lifting for the first time; it was so cool! but t
Electronics Forum | Tue Feb 16 16:57:44 EST 2021 | spoiltforchoice
But that only applies fully if you have the nozzles inline head to match, fast turret heads prefer to hammer a single lane, at least that would be my understanding given I don't have one :(. More active reels = more to track, that may matter to some.
Electronics Forum | Thu May 26 07:53:42 EDT 2022 | jojoled
Hi.Thanks for reply. 1. - I guess after JETting the paste, the head will go aside, to allow head with HD camera(SPI) to do the job.....and thus if used for AOI , the same camera will be much higher above components, not damaging anything....this is
Electronics Forum | Tue Aug 02 14:05:42 EDT 2022 | jojoled
Hi Evtimov,thanks. Well the "paralell pick" doesnt work at all if place the feeders exactly 104mm apart (for example feeder position 31 and 43) which is exactly the distance of the 2heads..even I put the feeders in 10 and 50 for example, it still pic
Electronics Forum | Wed Dec 07 18:16:27 EST 2022 | skolev
Hi everyone. I have little problem finding the right SMT nozzle for my new custom machine . For manipulating custom component with dimensions close to passive element 0402 . Now in machine i've put a siemens SMT Nozzle . But there are some problems
Electronics Forum | Mon Dec 26 18:02:37 EST 2022 | rgduval
So, your Hydra Z message timed out... A couple of potential causes: 1. Hydra MOT card failure 2. Hydra z-motor failure 3. Hydra z-motor encoder failure 4. Hydra z-lock failure 5. Disconnected cable 6. X-wagon cable Start by booting into service mod
