Electronics Forum | Mon Aug 01 10:31:34 EDT 2022 | spoiltforchoice
I'm not familiar with the machine, but isn't a KE760L an old slow "single head, single gantry" two spindle machine? Any speedup from simultaneous picking would not necessarily be that much of an improvement. Setup as you described is the way I would
Electronics Forum | Thu Oct 20 15:44:16 EDT 2022 | smtusa
What about MY100? Its based on the same high speed hydra head just two of them. Do you not recommend those as well? Originally, I was looking at a MY9 before spending on a MY100dx. Certain things mydata do make it attractive but im a low mix, high
Electronics Forum | Thu Nov 03 11:31:51 EDT 2022 | proceng1
You described cleaning the spindles and filters, but did you clean the nozzles? Perhaps you got some paste on the nozzle. Also, did you perform the vacuum and blow off testing? Make sure your solenoids are working properly. Is it all 6 heads that
Electronics Forum | Fri Nov 25 11:55:22 EST 2022 | poly
So I'm attempting to run feeder teach for my platform tray feeder... but I've got no idea what first point I should teach is... normal is the end pin of the feeder but this is for the ptf conveyor... so I've got no idea. If I just teach each corner
Electronics Forum | Thu Mar 30 08:04:56 EDT 2023 | hub
Hello, I'm looking for zevatech (juki) 570 owner that could help me to resolve my problem. I had the following error that occure just before (or sometime a few after) homing the machine : "E7018:Driver Error KNOCK position error ". Previsously I had
Electronics Forum | Tue Apr 25 20:22:32 EDT 2023 | ttheis
We have a line running GSM1 machines and we are considering upgrading to GX-11S machines with FJ3 heads. Does anyone know if the GX-11S machines can take pneumatic feeders from the GSM machines? We have a very large inventory of the pneumatic and ele
Electronics Forum | Wed May 03 13:35:00 EDT 2023 | ttheis
Thanks, Deni! We're replacing two 4-spindle GSM's with two GX-11S with Flex3 front and IL4 in the rear. These we plan to use a mix of our pneumatic & 24V feeders as well as high speed feeders as we acquire them. The sellers advised that the 24V kits
Electronics Forum | Thu May 11 07:19:36 EDT 2023 | richardcargill
There's a chance the vision system is seeing part of head 1 as it looks at the component. We get that with older nozzles on Philips equipment ( the black coating has worn to a silver shine ) and the component camera sees the nozzle tip, which annoyin
Electronics Forum | Fri Jun 16 17:52:30 EDT 2023 | daniel_stanphill
I have a catalogue from December 2022 of their spare parts and accessories and on page 20, Midas head Special tools, there are gripper nozzles but nothing that has that type of extra rotation to allow for what you are describing. It does say that ot
Electronics Forum | Thu Sep 07 10:27:23 EDT 2023 | poly
I bought a gx37 dual beam series 2 Genesis. It looks like it was in very good condition when it left Malaysia but the axis weren't secured at all for the sea journey. When it arrived the rubber stoppers had all been smashed. The z axis on both head
