Electronics Forum | Wed Aug 04 14:32:02 EDT 1999 | Barney Whalen
| Hi all, | | What is the typical placement head pressure for the GSM1 for placing the micro / chip Scale BGAs ? | | Thanks | Upinder | ======= | Hello Upinder, The typical placement pressure for a GSM1 with Flex head is 150-170 grams. You can p
Electronics Forum | Wed Apr 06 13:20:01 EDT 2005 | smtuser1234
Keep in mind if you are trying to add more pressure on a standard head you must use the following increments: 150, 250, 350 and 450. If you use 175 it will automatically go to 150. There are only four settings on a standard head. On a C4 Head you may
Electronics Forum | Tue Nov 07 10:16:20 EST 2006 | kevinp
The touch down sensor is probably the culprit, however make sure the head is not impacted with old solder paste and that the cylinders that flip the head are functional. I have had problems with one of the cylinders not functioning this caused the he
Electronics Forum | Tue May 15 21:44:35 EDT 2007 | marcelll
The best buy you can do right now. There's a lot on the market at cheap price. Easy to find feeders & spare parts at good price. You can find a good machine for $20-25K Dont buy with FlexJet head unless your use to work with these heads. Complicated
Electronics Forum | Tue Jun 26 08:47:09 EDT 2007 | geb
Hi we have a Universal GSM 1 flex head machine. It keeps on bringing up an "Axis Head 1 Z velocity over speed error during move absolute command". Pushing the e-stop button and then start again will allow it to continue making the panel. It happens r
Electronics Forum | Sat Oct 10 16:05:27 EDT 2009 | dilogic
I would if someone can share his "real-life" experience with FlexJet (7-spindle) heads. We are currently running machines with Flex heads (4-spindle), which are very easy to maintain, but I suppose 7-spindle has more throughput. All comments are welc
Electronics Forum | Wed Aug 04 08:37:24 EDT 2010 | keiths487
Just to get the simple stuff out of the way. Make > sure that no one has changed the machine nozzle > data to a different type. Then try actually > changing the nozzle data and putting that type > into the head. If this passes it will at least >
Electronics Forum | Mon Sep 20 14:23:50 EDT 2010 | dekhead
No, there is not a way to initialise into the diagnostics menu with the head raised / covers open. Literally lowering the head manually (prop head, disconnect actuator, etc) is naturally possible, but not receommended... and based upon your symptom
Electronics Forum | Sat Feb 12 18:35:56 EST 2011 | gabriel1blue
Thank you, that works perfect!! Now I was able to set up the offset's and program the machine, but now head #1 will move to the feeder location but it will not move down to pick up the part, then it moves to the drop area, but its only happening on h
Electronics Forum | Tue Jul 17 09:10:28 EDT 2012 | dontfeedphils
You can enter the service program for the MyData, can't remember exactly how, you have to exit out of tpsys to the command prompt and type service or something along those lines. Then you can check the raw numbers for vacuum and force on the Midas h