Electronics Forum | Fri Sep 22 07:35:37 EDT 2000 | Henrik Eklund
Hello everyone out there, I have been working in the SMT process for a couple o years now, and now I'm partly responsible for the turret head component mounting process. We are about to buy new equipment and I want to do a capability study of this m
Electronics Forum | Fri Mar 10 13:50:42 EST 2006 | Frank
Contact your local Juki distributor. But as a reseller of used equipment they may not be too willing to help out. And why would you want to add the expense and hassle of adding a glue head on a machine?
Electronics Forum | Sun Mar 12 12:29:26 EST 2006 | Edward P. Woldendorp
Frank, Thank you for your reply. A customer in Russia asked us for this glue head. He runs a PM-570L machine. What would you advise him? Thank you and best regards, Edward
Electronics Forum | Thu Aug 18 12:46:43 EDT 2011 | jdengler
In the center of the head shaft there is a rod that is used to flag 2 sensors at the top of the shaft. This lets the machine know when a nozzle is attached. Check that the sensors are working correctly and the rod moves freely. The sensors are fib
Electronics Forum | Fri Mar 10 03:45:11 EST 2006 | Edward P. Woldendorp
Dear All, Who can help find a glue head(glue dispenser) for the Zevatech PM570L machine? This glue head is mounted upon the machine. Thank you for your help. e.woldendorp@twentech.com
Electronics Forum | Mon Mar 29 22:01:48 EST 1999 | Scott Birnbaum
Can anyone give me information about a NCC8 (?) head for the Universal GSM's. Thats the one w/ four spindles and onboard vision (not flex jet however). Are there any maintenance issues with this style head? Is the onboard camera system accurate? How
Electronics Forum | Thu Jun 23 08:43:25 EDT 2005 | jax
The Lightning Head on an Advantis Platform is a good choice. You should expect to see "Real Life" speeds around 20K, better accuracy than any Turret Style Machine, and the software is the same as any GSM,Genesis,Advantis machine using a Windows platf
Electronics Forum | Thu Apr 01 14:22:12 EST 1999 | Jim Boudia
| Can anyone give me information about a NCC8 (?) head for the Universal GSM's. Thats the one w/ four spindles and onboard vision (not flex jet however). Are there any maintenance issues with this style head? Is the onboard camera system accurate? Ho
Electronics Forum | Mon Sep 20 00:51:03 EDT 2010 | jeffr
This particular Yamaha Head I/O Board is a common failure. Yamaha supply an updated version which is less likely to fail. The cause of the problem that you see is due to the connectors on the flexing and damaging the inner layers of the board. The on
Electronics Forum | Tue Sep 18 15:15:10 EDT 2007 | jdengler
Jeff, You assume too much. Not all VCD's had clinch in sensors. Darron did not tell us what vintage this machine is so what habsfan said could be the problem. We need more information to help. Does the machine stop when it doesn't cut the lead? D
.jpg)
