Electronics Forum | Wed Feb 02 09:59:10 EST 2005 | David
tring to find non magenetic surface mount header pins
Electronics Forum | Wed Jul 04 16:40:56 EDT 2012 | comatose
We use a lot of single row breakaway pin headers. Right now we order then as sticks of 36 and I just have a tech break them into whatever lengths we need (3 pin, 5 pin, 8 pin, whatever.) I'm trying to streamline our auxillary processes. I know you ca
Electronics Forum | Wed Feb 10 17:00:44 EST 1999 | James Seagle
Does anyone have experience placing a Pinrex 2mm 2x20 SMT header. The dimensions of the part are as follows: length 40mm (1.58"), width 6mm (.236"), height 5.35mm (.211"), pitch 2mm (.079"). If so, what type of centering are you using? Any advice
Electronics Forum | Thu Jul 05 16:32:54 EDT 2012 | jorge_quijano
I have never use it, but I know autosplice has machines that can break them automatically, I don know how they work but I know that some people in my area use these machines for the same process as you. Hope it helps.
Electronics Forum | Fri Feb 12 08:56:57 EST 1999 | Stefan Witte
You'll have to have a special nozzle made in order to pick the header from the feeder. The nozzle should pick the part throught the pins on the plastic body. I had once a nozzle made for the same application and placed the parts without any further a
Electronics Forum | Mon Nov 05 13:19:45 EST 2007 | slthomas
Call me jaded, but this sounds suspiciously like the classic "our other supplier didn't have this problem" but the other supplier was hand soldering the headers, and finally requoted the job with that in mind so the customer moved on. Granted, ther
Electronics Forum | Mon Nov 05 10:59:57 EST 2007 | patrickbruneel
You need to send the connector perpendicular through the wave not parallel. Patrick
Electronics Forum | Mon Nov 05 14:26:24 EST 2007 | hussman
Maybe the "other" company runs a different wave, or flux, or pallet, or touches up every board. Assumptions are like brains - every claims they have one, but very few use em.
Electronics Forum | Fri Nov 09 04:15:25 EST 2007 | reypal
how about applying solder resist on the area where you have bridging occurs..you may ask your pcb supplier the possibility.
Electronics Forum | Mon Nov 05 00:51:58 EST 2007 | omidjuve
We have a problem with soldering of a 96 pin header connector(9001-11961c00l1a from kingmate) we use 3 different wave soldering but in all of the machines we have many short circuit between the pins . the wave soldering machines that we use is fr
