Electronics Forum | Tue Jan 16 07:59:36 EST 2007 | tk380514
we worked out that the wave soldering cassettes Duratstone material takes alomst 35 degree away from the surface of the pcb, and the speed is already too slow it should be over 1.0 - 1.8 meters a minute but its now already 82 cm a minute, in order to
Electronics Forum | Tue Aug 31 20:41:45 EDT 1999 | Dreamsniper
| | I am looking for a rule of thumb regarding the maximum ramp standard components (chip capacitors) can tolerate without failure during the reflow process. The standard seems to be 3C\second, but this figure is generally derived from the average r
Electronics Forum | Mon Jan 20 17:42:45 EST 2003 | jonfox
Double check the data sheets for your paste. Just as an example, ou Indium paste has a recommendation for the Heating, Liquidus, and Cooling stagees of reflow. They recommend a linear ramp up of 0.5 to 1.0 degree C. In the Liquidus stage, a peak t
Electronics Forum | Tue Dec 24 11:01:19 EST 2013 | davef
I wouldn't get too tightly wrapped around the axial of paste suppliers recommendations of thermal recipes. Said another way, "Do not count on the solder paste representatives for good technical advice--they are the ones who came up with these "'TIME
Electronics Forum | Fri Dec 16 08:00:26 EST 2005 | jax
What you are most likely dealing with: Insufficient Pure Sn layer ( multiple causes ) Because elevated temperatures accelerate the diffusion process, the thickness of the Pure Sn layer will reduce during every thermal cycle... ( bakeing PCBs, S
Electronics Forum | Tue Mar 28 08:29:04 EST 2006 | davef
Pad design - Standard IPC 20 pitch QFP Thermal pad design - Layout the thermal pad 0mm to 0.15mm larger per side (0mm to 0.30mm larger overall) than the exposed die pad on the package. �Larger than�, as opposed to the same size, is preferred. Obvio
Electronics Forum | Fri Mar 20 15:10:54 EST 1998 | Steve Abrahamson
| Cpk's on top flight ovens (e.g., Conceptronics, Heller, Electrovert, Vitronics) vary wildly, from 1 to 2+, between different supplers. The suppliers don't seem to understand Cpk's. A supplier's rep whose oven has a Cpk of 1.0 told me: | 1. Cpk's
Electronics Forum | Sat Mar 21 16:37:22 EST 1998 | Earl Moon
| | Cpk's on top flight ovens (e.g., Conceptronics, Heller, Electrovert, Vitronics) vary wildly, from 1 to 2+, between different supplers. The suppliers don't seem to understand Cpk's. A supplier's rep whose oven has a Cpk of 1.0 told me: | | 1. C
Electronics Forum | Tue Apr 13 14:49:15 EDT 2010 | davef
90%) from the sample, and the bake time and temperature specified herein are minimums. To improve test accuracy, or to prevent heat damage, other bake parameters may be AABUS. 2 Applicable Documents IPC-QL-653 Certification of Facilities that Inspect
1 |