Electronics Forum: hella (Page 1 of 2)

Universal OFS

Electronics Forum | Tue Jul 25 07:56:39 EDT 2000 | Ed Holton

I would like to talk with anyone who has used, or is still using the Universal OFS machine. Thank you Ed Holton Hella Electronics 734-414-0944

High temperature soldering

Electronics Forum | Fri Apr 24 14:34:14 EDT 1998 | Ed Holton

Looking for anyone who has experience with high temperature soldering. Need to determine why solder joints are failing. Thermocycling of unit is -40C to +140C, 30 minute dwell time, 10 sec. transition time Your help is appreciated Ed Holton Hella E

Reflow Oven Chain Lubrication

Electronics Forum | Mon Oct 14 03:03:34 EDT 2002 | msimkin

Mike, I have been using a fully synthetic motor oil on the links of my chains of my Hella for 7 years now, and have had no problems. As long as you do not place the oil on the fingers, where it makes contact with the PCB, then you will have no probl

Re: BGA open

Electronics Forum | Tue Sep 07 12:45:47 EDT 1999 | Brad Kendall

Could someone shares their experience on the causes of 'Open' in the BGA after reflow. Are you having a problem with the joint openning up after reflow. Like it was soldered after the reflow process, but at final test is not? I had this pr

Re: Vibration testing of BGA packages/assemblies

Electronics Forum | Mon Dec 28 11:21:21 EST 1998 | Brad Kendall

Does anyone have any experience with vibration testing of BGA packages and assemblies? We are starting to design BGA's into some of our products and we have not found very much information on vibrational test results. Any information will be help

Re: High temperature soldering

Electronics Forum | Fri Apr 24 15:21:08 EDT 1998 | Earl Moon

Looking for anyone who has experience with high temperature soldering. Need to determine why solder joints are failing. Thermocycling of unit is -40C to +140C, 30 minute dwell time, 10 sec. transition time Your help is appreciated Ed Holton

Re: Preventive Maintenance Software

Electronics Forum | Tue Sep 07 12:05:39 EDT 1999 | Brad Kendall

I am looking for some PM software to use throughout my Electronics factory. Currently, we have a manual system consisting of check-off sheets, log-books, etc. Ideally I would like a system that would throw-up a flag (perhaps by e-mail) when PM is

Re: High temperature soldering

Electronics Forum | Fri Apr 24 20:33:06 EDT 1998 | D.Lange

Looking for anyone who has experience with high temperature soldering. Need to determine why solder joints are failing. Thermocycling of unit is -40C to +140C, 30 minute dwell time, 10 sec. transition time Your help is appreciated Ed Holton

QP341 vibra feeders

Electronics Forum | Mon Jul 19 12:07:09 EDT 2004 | Mark

Ok, I went to Fuji one day for a show and asked a tech on why when I use my Vibra feeders I can't keep em running for the simple fact they don't advance fast enough for the QP picking sequence. So to let you all know (has helped alot) you go into the

Re: Philips FCM

Electronics Forum | Fri Jul 24 12:53:30 EDT 1998 | Brad Kendall

I am considering of Philips FCM for the next production. But I have heard a rumour saying this machine is not capable for checking the lead polarity due to the laser scan system. i.e. SOT might be populated in wrong direction.

  1 2 Next

hella searches for Companies, Equipment, Machines, Suppliers & Information



Software for SMT placement & AOI - Free Download.
smt machines southwest

Orange Sticks, Wiring Aids & Probes for Soldering & Desoldering.
High Throughput Reflow Oven

ONLINE IPC Training & Certification
Solder Mask & Low Stand-off Component Cleaning

World's Best Reflow Oven Customizable for Unique Applications
Assembly Automation Technology

MSD storage in desiccant dry canbinets